help with back dragun

[Robbins]

Theres sumthing wrong with my dragun i cock the gun then i pull the trigger and it wont shoot. after i pull it a few times it will shoot 1 or so then i keeps doin this. basically i pull the trigger 5 times and only get 1 shot. PLEASE HELP i need to play.

[bluedragun]

check all of the o rings. that will mess a gun up big time if u have a broken o-ring inside your gun.

[HampsterFist]

Exactly what does it sound like? Do you suspect its the trigger mechanism, or is it that it will fire but has trouble staying cocked? Cause if its the 2nd one (having trouble stayin cocked) its because either it came too tight, or someone adjusted the trigger too tight in the back. On the back of the trigger frame there is an L-Key bolt, use you're larger L-Key to loosen it, if its too tight it will have trouble catching the hammer on the recoil after firing. If its the trigger mechanism (electronic problem) then send it in, you have a full warranty for 1 year, probobly a factory defect since I've never heard of a dragun not firing... unless of course... you're battery is dead. But if its neither and its one of the O-Rings, you can swap the O-Rings with any of those on a Kingman gun. Anyone who says they won't fit is a liar, the only difference between a Dragun and a Spyder is the trigger frame, rest is same identical internals.

[Silencer.1]

This is actually a common problem that is easily remedied. The sear isn't disengaging from the hammer. All you need to do is adjust the sear as per the instructions to lower it. Once that's done it will work flawlessly.

[Shmoo]

I have the exact same problem with my pie2. What exactaly do I have to do?

Thanks

[Silencer.1]

Catch me on aim tomorrow and i can give you a step by step walk through of how to do it. I'm extremely tired right now because of a 12 straight hours poker game. My aim is on all night and all day, so just leave a message and I'll get back to you sometime tomorrow.

aim = nukesunlimited