Black dragun2 firing problem

[Shmoo]

I own a black dragun 2 and love it. Today I used it for the second time and for the first half of the day it worked fine. But now, I have a problem. When I pull the trigger, I only shoot about 1/2 of the time. I pull, the shot registars on the shot counter, but no paint comes out. Does anyone else have this problem or know what to do to make the marker fire at full speed again?

Thanks

[psirus7]

I have the same exact problem...nobody seems to be offering
any advice.

[Robbins]

I called Paintball inc they said. To mess with the sears adjustment
i dtill havnt tried it. If it works tell me witch way u twisted it and stuff.

[Silencer.1]

It's one of two problems, the sear is too tall or the battery is going dead. I'd first replace the battery and if that doesn't work adjust the sear as per the manual.

[psirus7]

That will work for about 100 shots, and then go to hell
again. Your bolt will stick, your stip your gun and spend
hours trying to adjust the sear height, just like me.
If you do all this, replace the battery, and the gun still
fires only about 1/4 of the time, I think you need to
get a new bolt. BD bolts suck. I've had two BD, each
with the same problem, and my friend, a tourney player,
got an E-1 for ****s and giggles, same problem. Their is
an intermitten defect in a batch of BD's. I'm gonna get a
Shocktech delrin bolt, or an N-bolt, and I'll let you know if
it solved the problem.
- Sam

[133+ Player]

Recharge your origanal battery. I bet it didnt come with a plain 9v i bet it is liek a 9.6v or sumtin like that just go to radio shack and get a charger.

[bluedragun]

take the gun apart and check all the O-rings, That might be your problem, a broken o-ring.