PDA

View Full Version : Do you like your Fusion?

gooliemoolie
06-11-2007, 12:25 PM
What's so great about the Fusion?

P.S.
The Smart Parts World Championships DVD Set is AMAZINGLY WONDERFULLY BRILLIANTLY ACTION PACKED!!!!!!!!
babustos
06-11-2007, 08:22 PM
Everything is great about it except for the detents, mine seem to keep popping out of place due to the springs. I'm going to get different springs, or if they eventually come out with new detents I will get them. Everything else is awesome.
blakf0x
06-12-2007, 03:39 AM
It's amazing. Whoever voted hard to maintain, must be blind. This marker is by far the easiest marker to maintain, out of all the guns ive owned.
Betrthanworst
06-12-2007, 08:26 AM
Everything is great about it except for the detents, mine seem to keep popping out of place due to the springs. I'm going to get different springs, or if they eventually come out with new detents I will get them. Everything else is awesome.

If they are the brass detents, contact dp and they will install new ball bearing detents for you.
Cpt. Morgan
06-12-2007, 12:07 PM
It's amazing. Whoever voted hard to maintain, must be blind. This marker is by far the easiest marker to maintain, out of all the guns ive owned.

Most FASOR guns are easy to maintain. From my experinces, they are better than any stock FASOR guns below them (rex guns, Wrath etc) and do very decently against guns in the 600 hundred dollar range IMO.

But the Version 1 Fusion didn't have the greatest board.

I prefer the Fusion to the PMR or Epithany.
babustos
06-12-2007, 06:24 PM
If they are the brass detents, contact dp and they will install new ball bearing detents for you.

Already got them replaced, its the springs thats the problem.
Uziel Gal
06-12-2007, 11:48 PM
I would guess that whoever listed "hard to maintain" has probably looked at the exploded diagram in the manual and thought, "Oh my God, there's so many pieces", and assumed that lot's of pieces automatically means that it's actually complicated to work on.
babustos
06-13-2007, 10:51 PM
How hard is it to maintain a Fusion? Take the bolt out, take the ram cap off, take and ram and spring out, lube them up, slide them back in.
Meeshka
06-14-2007, 09:10 PM
I'd say its the easiest to maintain. 20 sec or less to take out the bolt and ram. then 20sec to lube both.
Wisconsinballer
06-15-2007, 06:55 AM
I really want a Fusion I found one that is an LE and the color is ocean and it has silver accents so awesome, I have to clean the drool off of my keyboard when I look at it. When I get the 425 together its as good as mine.
BoogerTHEfantom
06-21-2007, 09:32 AM
I like my Fusion. Just check out my Hybrid Traitor Series Fusion review.
kakayona
07-19-2007, 02:59 PM
i orderd my lemon/line le from sync@syncpaintball.com for 399 free shipping
ChaosPhoenix
07-19-2007, 05:49 PM
My fusion has been a dream. My team currently has 3 of them with atleast 2 other members saving or looking to get one. Maintanance is dirt simple. If it takes you 20 seconds to pull out the ram, wow, your slow, lol, it takes about 6 seconds to get the ram out. I can have the Both regs, the bolt, and ram, off the marker and disassemble in about 5 minutes. Cleaned and reassembled in about 20-30 minutes.

Plus this thing has help up to not only woods ball, but SPPL practice and play. Thats saying something.