98 Custom Dissamble

[Delta575]

I have a Custom Pro and I wanted to polish my internals but when I was removing the power tube it was very sticky... I have removed the two back screws.... I have to remove the gas line first? or its just sticked by glue?

Its the first time that I try to dessamble my first marker = P

Please any help?

PD: Im Chilean I speack Spanish xD but I think I can talk some english =)

[nicksniper]

yes mine was stuck to if you have both the screws that go in to the power tube out. you just need to take it out needs some force but not to much it is plastic!!! and when you put the screws back in you should put some kind os scealent on it

SO yes it is stuck down with a kind of glue

[-Viper-]

- Take to powertube out.
- Do not take off any hoses
- If it's sticky then just clean it with water and wipe it off, make sure you get ALL of the water off.
- Clean your recievers
- polish your internals.

[Delta575]

ok thanks =P

But what happens if I dont have Red Loctite? xD

[Delta575]

and another question xD

Can I install a xchamber with the Drop forward?

I always see pictures of xchambers but without drop forwards
so I wanted to buy one but I dont want to have the drop forward like a junk xD

[-Viper-]

- Don't worry about putting loctite on the powertube screws, just make sure the screws are nice and tight when you put them back in. All they do is hold the powertube in place, no need for loctite.

[nicksniper]

and another question xD

Can I install a xchamber with the Drop forward?

I always see pictures of xchambers but without drop forwards
so I wanted to buy one but I dont want to have the drop forward like a junk xD

yes the x-chamber will work most deffintly becuase it worked with me and i :love: it

[Delta575]

Thanks to all very much =D

[-Viper-]

Depends on the size of the drop. Take one in person and hold it up to your A-5 with X-Chamber installed and see if it will fit...