Turn off Eyes?

[BriCro]

Hey I know alot of people have asked this question but i have a hard time learning from reading.
So can somone explain explicitly how to turn the eyes off for a Lasoya Promaster.
I tried searching but the search tool seems to suck.
Thanks! :confused:

[GrimAssasin]

if you don't understand reading, how will this help you?sounds like you need a phone call or teleconference

[711]

For either of the two preset modes just hold the trigger as you switch your on. Or you can use the manual to program a mode and set it to not use eyes.

[shadonite]

Hey I know alot of people have asked this question but i have a hard time learning from reading.
So can somone explain explicitly how to turn the eyes off for a Lasoya Promaster.
I tried searching but the search tool seems to suck.
Thanks! :confused:

1) Turn your gun off
2) Pull and hold the trigger
3) Turn your gun on while still holding the trigger
4) Watch the LED light, it should stay lit for a few seconds and then turn off
5) Once the LED turns off, the eyes are now off.

To make sure your eyes are off, pull the bolt back (or air it up without paint) and pull the trigger. If it fires or the noid clicks, the eyes are off. If it dosen't fire repeat steps 1-5. If these steps don't work, then the Lasoya is nothing like the regular Promaster...

[BriCro]

I said I can't understand reading very well. But thanks to everyone else!
=D

[bronze]

i made a vid for yah and its uploading now. so if it turns out good, ill post it.

Any questions let me know. http://s112.photobucket.com/albums/n167/bronzealero/?action=view&current=100_0957.flv

[BriCro]

Nice Man, Appreciate it.

[Etfren]

Yup, turning it on with the trigger depressed will turn the eyes off, however, it will be capped automatically. Tried it with my Lasoya Promaster to be sure.

[bronze]

i can never get the damn eyes off by doing it your way.

Glad the vid helped. basically put the dip switches in that order and hold the trigger,now release trigger, wait until greenlight turns on. press trigger to desired setting. 1 Eyes ON. 2 eyes OFF capped at 11bps, 3 18 BPS and eyes off.

Now if u put it in mode 3 then ur gun in No matter which setting will go 18bps.

If u need a vid on how to turn the gun back for u can get the four settings, let me know:laugh: :tup:

[BriCro]

So the difference between the vid and
"1) Turn your gun off
2) Pull and hold the trigger
3) Turn your gun on while still holding the trigger
4) Watch the LED light, it should stay lit for a few seconds and then turn off
5) Once the LED turns off, the eyes are now off. "
is that this one, is the eyes turn off until you shut it off, but if you do it the Vid way. than it would make them off until you program them back on right?
Thats what I think I'm noticing.

[bronze]

honestly i was never able to get the eyes to turn off the ghetto trigger way. the vid i made will keep the eyes off until u go back and program them back on.

[Etfren]

The "ghetto trigger way" does turn them off, just make sure you hold the trigger down until the LED turns off. It is capped though, not sure at what, but below 18 for sure.

The way Bronze is talking about is actually using the dip switches to turn them off and in user defined mode they will be off and capped at 18, but if you switch to one of the 2 preset setting (the Semi mode and PSP ramping modes) then the eyes will be back on.