HP or LP for e spyder

[BKPB]

what would work better with a spyder fenix with all stock internals HP or LP

[GrimAssasin]

hp....lp your probably not going to ever recock.

[Uziel Gal]

For a Fenix, HP without doubt.

[BKPB]

ok thanks a lot

[JChan819]

I mean, if you go LP with your Fenix, you can get an LP tank, but it'd be easier just to get a HP tank.

Your Spyder needs about 800psi to recock, if you use an LP tank, all that's gonna happen is the bolt gonna move forward. :-)

[GrimAssasin]

I mean, if you go LP with your Fenix, you can get an LP tank, but it'd be easier just to get a HP tank.

Your Spyder needs about 800psi to recock, if you use an LP tank, all that's gonna happen is the bolt gonna move forward. :-)
i doubt even that to happen. the spring will be laughing too hard at the fact that you bought a tank with too low an output to recock it.

[Uziel Gal]

If you converted the marker to run at a lower pressure, it doesn't necessarily follow that an LP output tank would be suitable - it really depends just what operating pressure you achieve. An LP tank may not have a high enough output pressure, or conversely, it could be too high. Better to use an HP output tank, and then use an adjustable secondary reg to match the marker's operating pressure.

[xXBloodLustACXx]

Barely anything needs to use LP, the only guns I can think of are Angels with the stock WDP regs. Otherwise, you really can't go wrong with HP.