Project Marker Layout

[-Viper-]

Alright guys, I think I have finally come down to the exact pieces for my M98 E-Bolt Project.

Here is a list of what I have and what I need/want:
* means this is what I need for it to work properly now
-Tippmann M98
-Tadao Musashi M6 Proto Board
-Battery Harness for board
-RD Centerfeed
-Psycho Ballistics E-Bolt
-QEV to allow for higher rof's
-GTA Ram (2-wayed) to allow for higher rof's
-Timmy (4 way) 'Noid to allow for higher rof's
-*Verical Adapter w/ Low Pressure Chamber
-*Detonator Regulator
-Eyes
-*Macro Line
-Rebel Flag paintjob (not changing, no, I am not racist and this paintjob is not directed towards racism)

I could try to put an HP valve in the thing and see if it will work that way because now it has an LP valve, which with my HP tank without a regulator, uses 3000psi in about 100 shots. I don't know if the ram would hit the valve hard enough for it to work properly though...

This is my project marker, I do not intend to do this very soon as it will take a good chunk of change and time to get all the parts together and working properly.

Tell me what you guys think. My next purchase is the board as the guy at the shop has been holding it for me, I was saving money to fix my car which I just found out will be cheap so I will have $300 left over. The board will be $75 which is suprisingly cheap considerin' it's only a year old and a great board. The harnesses are going $25 which is kinda meh, but o well. Actually I correct myself, the VA with reg and LP chamber will be my next purchase unless the HP valve works properly. I want the GTA ram because I cannot 2-way mine and have it clean looking, I know how to but I would have hoses sticking out of the side of the marker. I know how to 2-way a GTA ram. The 4-way 'noid to allow the marker to cycle faster with the 2-way'ed operation. Centerfeed just 'cause. Reg. is self-explainatory. Eyes 'cause I can and how cool would it to be able to say you have that. Macro- duh...

What do you guys think? Add on? Take off? Thoughts!

Will take a good bit of time but I WILL have pictures up.

[Corrupted355]

Looks good, man. I say see if you can borrow a reg and try and make that LP valve work. It's gonna be easier on all the stuff you're stickin in there if it's working with low pressure, cuz that's what most of it's used to working with, like that 'noid. Besides, you'll probably wind up having less kick with LP if you get it to work.

I remember seeing a partially built layout a lot like the one you seem to be putting together. I can't find it right now, but I'll keep looking. Wish I could remember what site it was on...

Edit: I thought this was it, but it's not. Probably the cleanest non-kit E-bolt I've seen, though:
http://www.a5og.net/tippmann-98/8065-sleeper-e-bolt-project.html

[-Viper-]

Edit

[-Viper-]

I do have a Palmers LP reg that comes off the asa and lowers the psi down to 100psi which goes into 'noid. But I don't have a gas through front grip for my 98 to try out some regs so that is why I mentioned trying the HP valve in there first. I will have one reg for the main air source and then the Palmers, which already came with the marker, which will regulate the air going into the 'noid so that doesn't blow which would kinda... suck.

I think you're the only one really left on pbr which frequents the site often anymore... Maybe I'm wrong, I don't know, I'm usually on pbn making some stupid comments... but I come here every so often.

This forum requires that you wait 60 seconds between posts. Please try again in 43 seconds.
This forum requires that you wait 60 seconds between posts. Please try again in 21 seconds.
This forum requires that you wait 60 seconds between posts. Please try again in 5 seconds.

Wow, it actually posted and I'm at school right now... cool...

[Corrupted355]

Okay, I gotcha. It will probably be worth using the HP valve, as long as you've already got a working one, just to get the marker up and running, then eventually swap back to LP when you get a front grip reg.

Yeah, I gave up on PBN a while ago. I got tired of the flaming and childish behavior. I had them cancel my account so that if I'm ever tempted to post on something, I have to go through the sign up process, which puts me off enough to say screw it. I spend a lot of time at A5OG.net, and I've recently started lurking the UMS forums, cuz there's never anyone here.

[-Viper-]

The HP vavle works, now I just have to tune the velocity. yay.

But for some reason when I got it up to 13bos the Halo wasn't feeding, I don't think the front bolt was returning completely, I'll just have to adjust a few things and she should be good.

Man that thing is a gas hog, and I mean bad. I really need a reg and other stuff...

[Corrupted355]

I'm gonna blame the air consumption on the fact that you're probably shooting about 320 fps, what with the HP valve and not having tuned it.