Fusion, help with EYES.

[bgforce]

I've got a Fusion V2, but I can't seem to get the eyes to work. As I understand, when I turn the marker on it is automatically in Eyes On mode then if I hit the bottom button, the eyes are toggled off (in which case my gun fires fine with and without paint).

I have stripped the gun down and have cleaned the eyes and checked the wires for pinches and have checked the circuit board connections and don't see any damage.

Any Ideas?

[babustos]

So straight when you turn the gun on, the solenoid will click when pulling the trigger? With eyes on, the gun should fire ONLY with paint, or at least something to obstruct the view of the eyes. If you're 100% sure that you checked the wires correctly, you may have gotten a faulty pair or they're not aligned exactly right.

[Model98]

Remove the eyes and wipe them down.

The eyes might just be dirty and the reason why they are not working.

[DerMaverick]

I have stripped the gun down and have cleaned the eyes and checked the wires for pinches and have checked the circuit board connections and don't see any damage.

Any Ideas?

Remove the eyes and wipe them down.

The eyes might just be dirty and the reason why they are not working.

Just pointing that out....:crazy: