Tippmann Arsenals

[BigTom21]

OK Folks,

Lets see who has the Largest and most deadly Tippmann Arsenal. I want everyone to post up numbers of guns, how they’re set up, and what kind of ROF upgrades you have. Attach pictures too if you can. (please attach them so the posts don’t end up a mile long)

I’ll start

3 98 customs:
1) Custom painted black to OD green fade, R/T trigger actually firing over 15 bps. Mocked up into an AK-47
2) Silver, big drop with R/T, slow r/t only up to about 10 bps
3) Black, standard Semi, double trigger, big drop with on off
3 A-5’s:
1) Custom painted OD Green, e-grip, shock tech relocater drop, 400 round hopper, 4” barrel (CQB)
2) Double Trouble, both with Flat lines, 400 round hoppers, and equalizer cranks, field legal 30 bps
3 X-7’s:
1) Assault rifle mock up, R/T, 8” Apex ready lapco, stock, and all tac accessories, Pen spring mod
2) AK-47 mock up, trinty folding stock, R/T
3) UMP mock up, basic (for now), Lapco P&D stock, empire barrel kit

Ok so that’s 9 tippmanns in all, 4 R/T’s, soon to be 2 E-grips, 2 on Crank, and one Semi, plus the 400 round hopper loads I say it’s a pretty beefy arsenal of Tippmann’s. I’m sure someone will argue with that but I’m just giving my option.

Well what are you waiting for post up.

(I will attach pics later I am at work right now)

[trolleyman98]

Why would you want three of each gun?

Well, I have one: an A5. It has a WAS egrip that's busted and a flatline barrel. Nothing special

[Orpackrat]

1. Tippmann 98 Custom:
RT (Big Air Mod)
Folding Stock
Cyclone (Big Air Mod, Vortex Ratchet, Lighting Rod, QEV, 450 round hopper)
22" Straight Rifled Barrel with Apex Tip
Under Barrel Grenade Launcher (custom built, operates on markers air supply)
Expansion Chamber (2)
Tippmann Regulator with duel output, on/off valve equiped for launcher
Carry Handle

http://i146.photobucket.com/albums/r274/Orpackrat/PIC00146.jpg
(Carry handle and second expansion chamber not on currectly)
It is massive and has some extreme firepower, its my primary.


2. Tippmann 98 Custom
After Market Barrel
Rocket Cocker
Rail Adaptor
Full Floating CASV Rail System

http://i146.photobucket.com/albums/r274/Orpackrat/PIC00065-1.jpg


3. Tippmann 98 Custom
Rear Cocker
Custom Tiger Stripe Paint Job

http://i146.photobucket.com/albums/r274/Orpackrat/PIC00163.jpg


I Forgot that I have another 98C that I have been cutting on whenever I feel like it. Recently I have been turning it into a short, CQB, night game marker, its currently a no to low budget prodject mainly using extra parts that are laying around.

Currently it is:
Cut off front grip
Cur off rear sight
Filed down lettering (still need to file more)
3" sawed off barrel
Dishka
Tippmann Regulator (has the side output I needed
Forward facing tank (Should get a 3.5oz but I only got a 9oz)
Powertube inlet, body cut back for easy access
Curving out MacroLine (sticks out just enough not to interfer with handgrip)
Will be putting the trigger guard back on
Plan on eventually putting rails on top and bottom
Will most likely put a 15 round tube on (PVC for now)
Different grips on it, not sure what kind (came when bought it used)

Will probably do alot more cutting later on, depends on how I feel and what I want to make it into next.

Current Picture:

http://i146.photobucket.com/albums/r274/Orpackrat/PIC00179.jpg


I have 2 more markers but not Tippmann, cheap walmart marker for claymore prodject. RAP4 Gen4 with Floating Rail System and M203.

I think thats what I have, got to go through my gear and see if there's more :laugh: .

[Curly Fry]

98c ACT
-APE rampage board
-APE magnetic trigger
-Shocktech large drop
-Shocktech on/off ASA
-J&J s2 12inch barrel
-JCS gold power tube


thats my 98c

got like 5 other tippys, they have just a bunch of random stuff that i swap around according to the friend who is using it

[Corrupted355]

From newest to oldest...

A-5:
APE E-grip, JCS Dual, Super R/T, q/d steel braided line, new style right receiver, polished internals, G36 folding stock, Vortex, QEPH, Squishy Paddles, X-7 hopper, Lapco offset rail, Armson Prodot, 10" PPS Brass, Apex tip, PPS male Stablilizer, X-7 valve, CMI micro-coil remote, Uncle Mike's q/d swivel sling mount

Custom Pro (does it count if I haven't seen it in a year?):
12" J&J Ceramic, Rocket Cock II

Pro Carbine (do permanently loaned out guns count?):
stock

[Govinda_T]

2 Tippmann A-5's.

Primary:
* GTA Double Trigger
* Pen Spring Mod
* Polished Internals
* TechT Hairpin Trigger Mod
* UBER Response Trigger
* Various RT Hax
* TechT Vortex Mod
* TechT Lightening Rod
* GTA X-7 Cyclone Piston Housing
* GTA X-7 Feeder Paddles
* A.P.P. T4 Offset Hopper (Holds 410 rounds...)
* Shocktech Supafly Bolt
* Dye Ultralite Two-Piece Barrel with .688 Back and 12" Front
* HPA
* Stock Stainless Steel Hose
* Automotive Wire Loom Gas Line Covering
* Stock Foregrip
* Homemade Wooden Fore-End
* OPSGEAR G36 Side-Folding Stock
* OD Military Assault Sling
* PMI Pure Energy Coiled Remote Line
* GTA X-7 AK-47 Front Sight
* Custom Weaver Rail Adaptor
* GTA Stock X-7 Rear Sight
* Woodland Camo Scheme
* Custom-Fab AK-47 Gas-Thru Mag Kit
* Unique Custom Engraved Nameplate That Reads: "BERSERKER"

TOTAL: $1500
MAX ROF = ~18 BPS
MAX PAINT CAPACITY = 410 rounds
LENGTH = 44" extended, 32" folded
APPROXIMATE WEIGHT = 15 lbs loaded


Secondary:
* Polished Internals
* GTA Double Trigger
* HEAVY Trigger Spring
* TechT Hairpin Trigger Mod
* APE Rampage Boarded E-Grip
* TechT Vortex Mod
* TechT Lightening Rod
* TechT QEPH
* GTA X-7 Cyclone Feeder Paddles
* A-6 Sight Feeder II Hopper (Holds 375 rounds...)
* Smart Parts Progressive 12" Barrel
* Smoothed-Over Stock Bolt
* Stock Stainless Steel Hose
* Automotive Wire Loom Gas Line Cover
* 32 Degrees Coiled Remote Line
* HPA
* Stock Foregrip
* Stock Endcap
* Black Military Assault Sling
* Stock Iron Sights
* Ultra-Flat Black Paintjob
* OPSGEAR UMP Gas-Thru Mag Kit
* Unique Custom Engraved Nameplate that reads: "The Black Rose"
* Custom Black Rose Decal
* Skull Adornment On Cocking Handle
* "Sleeper" Look (Has appearance of being a Stock RT'd A-5 upon first glance...)

TOTAL: $750
MAX ROF = 21 BPS
MAX PAINT CAPACITY = 375 rounds
LENGTH = 22"
APPROXIMATE WEIGHT = 6 lbs loaded

See my Signature for pictures.

[BigTom21]

Why would you want three of each gun?

Well, I have one: an A5. It has a WAS egrip that's busted and a flatline barrel. Nothing special

well i started with one 98 then my little broter and sis wanted to start playing so i got 2 more

then i got 2 A-5s to build my Double trouble, and after that i wanted another a-5 to put an e-grip on and make a CQB gun

and finally i got the X-7s b/c our team just got a sponsorship contract with Tippmann and i had to get at least one so i said screw it and got 3, so they could all be mocked up different and i had back ups if one went down.
(we play so much and so hard its 10 times easier for me to just pick up another gun if one goes down and get back on the feild)