Install Cyclone feed system.

[J_o_S_h]

does anyone have a video link showing how to install the cyclone feed from scratch?

[Orpackrat]

does anyone have a video link showing how to install the cyclone feed from scratch?

How to put together the cyclone feed?

How to install it on one of the Tippmanns?

How to install an upgrade kit?

Search:

http://www.youtube.com/

http://www.youtube.com/watch?v=FALJ0BEHY8c

[J_o_S_h]

how to install the cyclone feed system onto my Tippmann 98 Custom with A.C.T.

[Orpackrat]

how to install the cyclone feed system onto my Tippmann 98 Custom with A.C.T.

Its as easy as removing the feedneck from you 98C, put on the cyclone on the gun, unscrew the plug in the powertube, screw in the cyclone hose.

If your powertube does not have a plug in the side, then you will need to install a different powertube which means taking apart your 98C, and swapping out the powertube's.

[J_o_S_h]

ok thanks i just dont want to screw it up when putting it on that is why i like a video to refer!!

[MightyMace]

Orpackrat pretty much summed it up

If you have an older 98c then you probably have to drill a hole for the powertube cyclone/RT adaptor to go through, in which case good luck!

A little word of advice - put some tefflon tape in with the threads on the cyclone feed hose. When i got mine it leaked all over the place like an old persons bladder.