Smart-Parts Service Dept

[moe371]

Any one ever deal with Smart-Parts service dept. I bought a SP1 12/27/08 and when I hooked the co2 tank up it blew a seal or some thing. I replaced ever seal I could on the gun and I still have air leaking out. I called today they told me to log on to there site and get a RMA# so I did. Didn'r know how fast of a turn around they were.
Moe371:mad:

[iliveforthis99]

Where's it leaking from?

[moe371]

Well around the board and the back of the gun.I got the leak around the board stoped but the leaak in the back around the bolt I can't stop. I replaced ever seal in there.
Moe371

[iliveforthis99]

Did you take off any of the fittings?

[moe371]

No It is internal some were. I got a rma I am going to send it back. I would of liked to fix it but it is new so they surley will stand behind it.
Moe371

[AmbushOrigin]

either 1. you blew the noid. (I did this on mine >.<) or 2. perhaps the orings inside the 2 fittings that hold the board in place are bad.

Theyll fix it up for free though, turnaround is anywhere from 2-6 days. depending on location and what needs done.

[brickdoctor]

I sent my marker to smart parts and they replaced the board free of charge hadit back in about 1 1/2 weeks, I was very pleased with there coustmer service. And i have good things from others about them

[moe371]

Thanks Guys.
moe371