mini troubles

[chrome9k]

ok so my stock mini has been transformed into:

stock board, vlocity jr w/ dynasty chip and ninja paddle, deadly wind carbon fiber barrel.

after changing the board settings from semi auto to ramp (after 3 shots), i recently noticed this:

3 shots will be fine, but once the gun starts to ramp, the ball just fall out of the barrel...

the dwell settings are stock, the firing rate is 19 flashes which comes out to be 19.5 bps

is the loader feeding too quickly? or am i just making a noob mistake and overlooking something...


ps. i recently cleaned my gun and just took out the spring to lube the o rings ... maybe i tweaked some of the velocity settings?

any help is much appreciated...

worse come worse when i get to the field ill have them take a peek...

[paingwin238]

new batteries always seem to help me otherwise i would make sure that your tank is filled to pressure your gun enough. I would also re crono your gun if at all possible

[Dees_Troy]

Make sure your tank is screwed all the way in. If you just screw your tank in until you hear the woosh of air, you may not have the tank's valve opened far enough to recharge the Mini at a high rate of fire. Also, what kind of tank regulator are you using and is the tank full or nearly empty?

[chrome9k]

tank is on the empty side...

i have no place to chrono til i get to a field

i will change my batteries asap...

didnt try aNY of that...

i have 0 paintballs so i need to either buy reballs, get paint, or wait til friday for the field...

but this is great ... thanks for the suggestions guys!

[paingwin238]

just go pick up a case of rec ball grade and maybe you should invest in a hand held chrono. Always change your batteries though that is usually the major problem