Impys

[PbAllWiZZ]

how do impys work.A diagram would help.

[The Legend]

Just like an angel, bushy, tribal, em1, etc.

Its basically like a spyder, except the mainspring is replaced by a solenoid so you can have it do anything you want.

[bob dole]

Like the legend said. But, since you asked for a diagram, here it is, found on the impulse FAQ website:

http://www.kamworld.net/paintball/animationimpulse.gif

By they way, if you have any more questions about impulses, i would really suggest stopping by the impulse FAQ http://www.kamworld.net/paintball/Impulse FAQ.html and checking it out, its a great site-you wont be sorry you stopped by.

[PbAllWiZZ]

thanks but the FAQ doesn't load.So I was wondering where does that gascome from to recock the gun in the bottom and where does the electric trig frame come in?

[wolverine]

Try this link http://www.kamworld.net/paintball/ImpulseFAQ.html

bob dole forgot the ".html" at the end in his link.

[The Legend]

Originally posted by PbAllWiZZ
thanks but the FAQ doesn't load.So I was wondering where does that gascome from to recock the gun in the bottom and where does the electric trig frame come in?

The gas to recock it is in the solenoid. The solenoid is an electronic/pnuematic valve basically. Wires from the circuit board go into it, when electricity is sent through them the valve opens/closes. Depending on how you have it set you can have it open/close for short, or long amounts of time.

The electronics arent a "trigger frame" like you see on spyders, etc. Those are still blowbacks, they just have an electronic sear.

Impulse's have no sear, its all done by air. While it make look like a spyder type gun, its opperation is way different (in a good way, of course).