Make Your Own Drop Forward

[Assassin]

Hey, my dad works @ an place where they make parts and stuff for cars. Anyway, I showed him what drop forwards looked like and asked if he could get me some aluminum. He did and I was just wondering if you guys have ever made your own D/F before and if you did, could you share the plans? I think I'm going to make one similar to the Psycho Ballistics or something...the only hard part is how it's thicker at the end where you attach your ASA. So anyway, if you could give me some tips on making one or a good site, thanks. Tyler :D

[MethodusMaster]

Heres a simple Custom Drop Forward that you can let your imagination roam free on! sry, I had to make it into a zip (Files where to big) includes instructions and diagram

[Assassin]

Thanks man.:)

[F355DUDE]

I have 2 that I have done.
one is very simple. Go to your local hardware store and purchase a piece of metal about 8" long and about 1/8 in thick and just bend away. Thats how I made my current one. It drops the asa about 1.5 in down and about 1 in infront of my front foregrip.
The second is similar. Find a piece of metal that is a little thinner and buy some pipe clamps that will fit around you tank. Just drill the appropriate holes for the grip screws and bend the metal in the shape of a drop and attach the tank on with pipe clamps. Then, take the ss line with asa still on it and bend it down and screw the tank on to it and tighten the clamps. This was you can adjust your tank to any position far/ front. I had mine so my 20oz didnt stick out from the back at all.