I got full auto on m98 for no cost!!!

[The Paintballer]

It only took a lil' wire/nail in my trigger sear!!!
It's so loud!!! It freaked my mom!!! Its really gonna scare the people on my field!!! I dont whether this will hurt something in my gun...
Has anyone tried this?
:eek: :eek: :eek:

[flagrunner98]

can ypu teach me how to do that?

[Telefragged]

Unless you enjoy serving drinks from the barrel of your marker (not advised...hehehe) I suggest you take it off. I thought of that when I fisrt got my marker, everyone has the idea. By holding the trigger/sear down, the gun will cycle way to fast for the gun to feed paint, even with an agitated loader. It's just not feasible.

And another thing, if you play at an organized field, I doubt they'd let you use it, full auto and burst/turbo firing modes are being progressively banned at many fields/tourneys around the country.

Just my .02

[The Paintballer]

Well the guy above me might be right, but what about a electro hopper? (is that the same as an agitated hopper?)
Anyway u take your gun apart.
Now cock it.
See the pin that holds the sear? There is xtra space next to the pin. Jam somethin into that space(make sure u can still close the gun). Now u can hold the trigger down and not catch the rear bolt. Gas up and test it. Careful...im not sure if itll damage your gun.

[30a2]

Okay, first off don't use full auto all the time. I think it's a waste of paint and breaks balls very easily...

Now, if you are wondering how to make your marker full auto without taking apart. Here are the steps:

1. Gas up your marker
2. Make sure you have no balls loading into the chamber (this full auto will break every ball)
3. Cock your marker and rest your thumb behind the Bolt Handle (you know the thing you pull on to cock the marker)
4. Pull the trigger while keeping your thumb in place with a little pressure.
5. Everyone in the room jumps through the roof:D

Okay the reason why this works is because your thumb is in the way of the bolt coming all the way back onto the sear. The reason why this breaks paint is because the front bolt doesn't go all the way back.

Wear Gloves... Your thumb hurts like crazy if you don't

[specter542]

everyone knows about this mod. it is pointless b.c you will never get it to feed as fast as it is cycling.
get a RT and a 12v. or a 2xtrigger and take out ur trigger spring. this mod is pointless and is liable of screwing up ur gun.

[The Paintballer]

Okay thanx...just needed to know.

:D

[Telnets]

man thats old.. you just found that out?

I was doing that a month after i got my model 98 like 2 years ago. I usuly do it to pretend im out of air, then when they try to bunker me i peek around the corner and take them out

[Villhime98c]

I tried that full auto mod a while back. The problem was it fired WAY to fast, my 12 volt revvy could not even feed it. Waht Idid though, was Itook one of those miniature oreck vaccums and put the hose on the reverse end so air was blowing out. I then made an adapter to hook the end of the vaccum hose up to the feed neck, then I put 15 balls in the hose and made sure they were stacked up verticaly inside the hose, going down into the feed neck. I then tured the vaccum on and pulled the trigger untill all the balls were fired. Some how my ghetto warp feed kept up with the insanley fast ROF that this mod. produces. It did not even chop one ball

But the vaccum thing is pointless, since it would be impossible to play with it.