Blade trigger help!

[Drewdini]

I have the blade trigger and i adjusted it, should i use locktight to fasten the screws in place?

How do i eliminate side to side play?

When i point my barrel upward my gun fires at least once, which is dangerous.

How do i correct that problem, and it is becuz the trigger seems loose and falls down.


Thanks

[-RuShPB227-]

sometimes when i closed my hopper my gun would shoot, so I backed my adjustment screw back out. Just use blue loctite to lock it in place

[Drewdini]

that happens to me too, which screw did u adjust

pull

or

return

[-RuShPB227-]

adjust the pull one out just like 1/6 of a turn, or until you desire, as long as it doesnt shoot when you move the gun.

[Drewdini]

thats the horizontal one right?

thanks for ur help

[FOM]

Did you leave out your trigger spring when you put it back together? or maybe did you cut it down too short?

a trigger that light is NOT as fast to fire as one that has some "spring" to it.

If you didn't put the spring back in, do so. If you cut it too short, the try screwing in the adjuster screw some more.
Or pull the spring out of a ball point pen and start over on the return spring.

I would suggest you don't worry about side play. If you want fast trigger, it has to have some side play. but if you want ot with the prise for lest side play insted of wining the game, go to a hobby shop that sells RC stuff They will have little shims in 3/16 shaft size. you can use these to shim your trigger as tight as you want it

FOM

[Drewdini]

thanks FOM and impygimpy...i opened up my trigger and tightened the spring and now my trigger rocks......

FOM why should i not eliminate the side to side play?

thanks

[Drewdini]

impy how did u make ur font smaller in your signature?

[-RuShPB227-]

Drewdini, ask me on AIM, if i do it here it makes all my font small.