Upgrades for the Sypder SE?

[Angst]

After the barrel, what next upgrade is the most important to get for the Sypder SE?

[Keikan]

ummm... no

[Predator2]

I recommend a low pressure chamber and a rear cocking bolt. After that get a regulator to replace the xchamber and get an antisiphon tank and then get a turbo valve such as a TASO Turbo Valve.

[A damn fool]

Get a revolution, then do what predator said

[TLplus84]

get the Turbo valve and rear cocking bolt first. The low pressure chamber won't be needed till the reg is bought, so you can buy those at the same time. If you want to use the AKA valve, you will have to buy that last because if you put over 400psi into it, it will be damaged. SO i suggest a regular turbo vavle like that Magna valve, Taso vavle, or the Venom TUrbo valve. Those can be used just as good with low pressure and it does not damage if over 400 psi is put through it. Get the valve and bolt first. I suggest the Shocktech Deluxe Rear cocking Delrin bolt. It is quiet, high flow, and reduces blowback. ALso, if your rate of fire is high, you will want to get an agitated hopper. go for a Revolution, don't buy the Evlution..they are not worth it.