Leaking need big help

[genericpball]

I thought my maxflo was leaking, but when I push the bolt all the way foward it doesn't leak in the maxflo, but down the barrel. What should I do? I also have the Eclipse Horztional Reg Vertical mount.

[The Legend]

Is your valve lubed?

Take the eclipse mount off the gun, grease any orings and reinstall it. If it still leaks its gotta be an air line fitting, new macroline and loctite should solve that.

[genericpball]

I love you legend

[The Legend]

Uh yeah...same here...I think...:rolleyes:

It could be many other things, but those I would try first.

[genericpball]

Legend theres another twist to the story, I can gas up just the max and it doesnt leak

[FactsOfLife]

Originally posted by genericpball
I love you legend

oh that is SO cute!:love:

[johnnyrotten]

Also clean out your solenoid, you might have gotten a piece of junk in there. Next try looking at your hammer assembly, when you do, rub your fingers over the o-rings back and forth to see if you have a sliver of o-ring that is losing its seal.
Do the hammer first, its the easiest to do

[The Legend]

Where exactly is the leak comming from? If you hear it down your barrel its a valve problem.

If its toward the back of the gun/solenoid area it could be a hammer/solenoid problem.

If its from the front of the gun its a fitting or eclipse mount problem.

[genericpball]

I think I might have it now, I don't think I had the little tube on the side all the way in.