Question about trigger screeching.

[MiltonHe]

I got a question about the TL+ I just got. After taking it apart and oiling it well, when I put it back together it is giving a slight metal on metal sound on the trigger pull.

I'm wondering what I did wrong and what I can do to fix it. Did I bend the trigger in the frame or something? Oris it something easier. I must have take off then frame and trigger three times and all the easy stripping so I don't think I am missing any pieces or put the wrong piece in the wrong place?

Any help would be greatly appreciated.

[Magnus55]

Make sure you check your springs for the trigger. Sometimes that little piece that sticks out on the end of the spring might scrape against stuff if it is put in wrong. Its good that you oil your gun, but you really shouldn't take it apart unless you really know what you are doing. ;)

[MiltonHe]

Actually, it's been fixxed, it was the spring and some oil.
You can't really learn without taking it apart through... so until you try.. how can you know what you're doing? The TL+ seems like a really simple setup so it was a breeze to take apart and put back together.

[Magnus55]

yeah thats true. Maybe I should tinker with my gun a bit more often...:)

[dawgs712]

i have disected 3 spyders, the se, xtra, comapct 2000, and . every one of em was exactly the same