PDA

View Full Version : Please HELP

hyper
05-09-2001, 08:06 PM
I just got a scorpion, and had a six stage expansion chamber put on. When I take out my Co2 tank, it hisses like normal, but then there is a loud bang when it is almost out. Is this bad? what can I do to fix it? Also, my friend has a Tl+ and where he screws in his Co2, there is a small hole which is where the Co2 rushes out, and he has no bang. Mine doesnt have this hole, and this might be the problem. Should I make my own hole?
KoRnMaN
05-17-2001, 12:23 PM
NO do not make a hole the reason hits banging is because the pressure inside the expansion chamber is bilt up and it wrecked one of my tanks because I kept taking it off too fast. What you do is slowy and I mean slowly take the tank of. Let all the air bleed out of the expansion chamber. Then when you think all of the pressure is gone and its just coming out of the tank then take the tank off. When I meen slowly take the tank off slowly only when its starts hissing not when its still fully threaded in.
KoRnMaN
05-20-2001, 06:41 PM
Do what he said but also take it off very slow otherwise it might wreck around the pin area (like blow a chunk off because I know from experience) (its happend to me.:(
KoRnMaN
05-20-2001, 07:06 PM
Ok it bent it and then it came off. But if you can still screw it in and have a o-ring it still won't leak. Thats what I did untill I got it replaced.
KoRnMaN
05-20-2001, 07:31 PM
You don't even understand me I ment the outer part where the o-ring goes around. That chipped off.
KoRnMaN
05-21-2001, 09:48 AM
Ecuse me im not a friggin newbie. So your 12 years old right? And no I did not cross hatch the threads STUPID! BLAH BLAH BLAH. if It screwed it the wrong way it wouldn't even work because it would leak air STUPID. My gun did work. O yea your the one that screwed it in wrong.

[Edited by Richy_C on 05-25-2001 at 09:53 PM]
Richy_C
05-26-2001, 12:01 PM
talk about a waste of webspace