Lp Timmy?

[Spanky May]

Ok are there any changes to make your Timmy Lp besides adding another reg. to the vertical input. Then adjust the regs on the gun. Thats it? Also are the new grips out and is it best to order directly from Bob or would it be best to get it cheaper from some where else? Oh can you use black shelled paint with the ant-chop eye cause i heard some don't work if using this paint. Thanks for all the info.

[elTwitcho]

Timmy is LP to start with

250psi before LP mod, 180 after

Changing to the LP mod, involves removing the spring inside the High Pressure regulator, and removing the pin valve, converting it essentially into an air chamber. Then, the inline regulator will set your operating pressure. If your inline is set at 190 psi, the gun fires at 190 psi. The bottom reg is left intact, and should be at around 75-90 psi.

[elTwitcho]

And yes the eyes work with black paint