SPYDER EM1

[VIPER_101]

I have read in a magizine that the em1 can fire up to 20 bps.But i have also heard that if you shoot it over 13 bps it will almost always chop paint.Is this true?????

[dawgs712]

chopping paint has nothing to do with the gun, its only the hopper feeding the bolt in and how fast you are pulling the trigger.

[iipaintballer]

It has a very high potential for chopping paint if you do not have an adequate loader. If you want to be able to shoot the marker at that rate, you will need a 12v revolution or a warp feed. Otherwise the marker will have a large chance of chopping paint. Chopping paint occurs when the marker fires faster than the paint can load into your marker. If the paint cant load fast enough then, the bolt might chop

[ammoman]

you cant get a warp feed for it cuz its vert feed!

[Kamakaze_Newbie12]

you can get a warp feed for a vertical feed gun, in the new issue of apg there is an artical about the warp feed and it shows a vert feed angel with a warp feed attached.

[iipaintballer]

Yeah, there is a Airgun designs warp feed specifically for the mag. THen there is a Pro team warp feed that comes with adapters for any marker.