Repair a barrel?

[AngryMelon]

My straight shot squeegee some how scratched the crap out of the inside of my barrel. Is there any method for reparing the bore?

Thank you drive through...

[Counterfeit]

Moving to General paintball Talk

[ElectricHead]

i think a barrel finish might help

[MeWrOq]

It might just be the rubber end of the squeegee rubbing off... that happend to me and I put it in some really hot water. After that it was good as new.

[Phaelon Veritas]

well I have a suggestion I don't know but this may work if the barrel is actually damaged dremel sells a sanding bit which resemble a ferry paddle and if you can get a light enough grit snad paper say like 250 or 300 you could feasibly use a snake extension and drop the bit through the rotary tool on and snake the extension and bit back through the barrrel by doing so you would probably enlarge the bore size by a couple thousandths but you could just but different paint to match the barrel size....or if the scratches aren't too bad use RP BigBall it has a somewhat thicker shell and might not give you as many breaks

.....imop it might work