I NEED MAJOR help with MYGUN?!!!!!!!!

[Chip096]

Well i have a problem . The problem is that i try to shoot my piranha bl. I pull back the cocking rod and 1 paintball flies out and i pull the trigger again and .......... what? no paint ball comes out? WhAT is the problEM ?

[harrysacks]

u should take it to a shop or somethin and have them fix it

[pr0kch0p]

there is prolly a problem with the air flow because it isnt cocking itself after the shot

[Creek]

fill in the loop holes,is a ball loading up what.is it shoot air but not ball etc.

[Sid]

Like creek said, its a process of elimination... if you still can't figure it out, go to your pro shop.

[Chip096]

Uhhhha well when i pulled the trigger nothing happened. No air or nothing.?!!





someone plz help i dont want to take it to a shop... If it is the air flow HOW can i fix it?

[Creek]

When was the last time you oil this marker,also when you shoot it dont the marker stay cock you do you have to recock it.Also you using co2 or compressed air

[Chip096]

i oiled it four weeks ago a . The cocking rod stays back, but it won't shoot??! I use 20oz CO2 . IT kinda seems like it doesn't go back all the way. After I oiled it I used it 2 and a half weeks later.????!!!!!!




Thanks and PLEASE TRY to help me?????!!!!!

[Edited by Chip096 on 05-19-2001 at 05:18 PM]

[pr0kch0p]

well you should oil it after every use, or like once a week

i dont know what is wrong with it just a suggestion for the future

[dawgs712]

take off the trigger frame, if its like spyders, the trgger should pivot back and forth and when the grey trianlge sear thing is pushed over the piece that pivots, it moves with each shot. check to see if the sear can be pushed over the pivot part of the trigger, if not than it cannot release the stiker to push bolt. this is with spyders, and pirahnas are similar, but mabey triggers arent

[valkir]

r u sure you have your tank screwed in tight?If it doesnt go all the way then there will be no gas flow in your marker.