Pressure Climbing

[seksi]

OK i am using an anti siphon on off Co2 tank. I set the pressure at about 170 but if i dont fire the gun within a minute the pressure climbs to about 200-220. What could be causing this. The manual says to check the O rings in the max flo but they seemed good when i did. What else could be causing this?? or is this natural cause im working with Co2??

Plz help i need a doctor:eyes:

[i like tictacs]

if you even tip the gun forward with co2, and any liquid gets in, the pressure will rise. between games stand the gun striaght up on a tree or soemthing so that no co2 gets in.

[Skog]

is your imp new, if so then your max-flo will not have settled, you will need to get a case or 2 through your imp to get this to go away.

it is quite a common problem, and is not because of the co2, you just need to wear in your inpulse first, you should see a big decrease in the problem after about 1/2 a case, but you may have to put about 2 cases through it before the problem goes.