BIG A. PROBLEM!

[Ded]

ok, i despersately need to take apart my gun but all of my alan wrenches seem to have disapeared! I have some smaller ones but they are too small. duh. does anyone out there know any little tricks that work in this kind of situation?

[Ded]

somebody told me that if i put super glue in the whole then put the wrench in there I can mold the glue to the wrench and have a smaller hole, would this work?

[NICKYB]

IT would work if you wanted to GLUE YOUR FREAKING WRENCH TO THE HOLE!!!!!!! bad bad idea. The only thing i know is to go buy some more wrenches.

[Ded]

thanks for the tip, about how much would these "wrenches" cost? the ones I had came with the gun it's a spyder TL so do I need standard or metric?

[elTwitcho]

If it's kingman you need metric. Should cost less than 10 bucks, just ask your local hardware store for a metric allen key set, also know as hex wrenches

[iipaintballer]

YEah I got my set for about 5 dollars.

[poiuyt]

its a &^%&ing allen wrench!!! It would only cost like 1.00 for a set of bent metal!

[DasBaldDog]

P: You got some anger management issues to deal with.

[Ded]

thanks guys I'm going down there today to get some metric wrenches, thanks again.

[Ded]

I like metric better anyway, don't even get me started. Why would one country stick with a "standard" system of measurement that is 20 times harder to use than the metric system. with metric everything's in intervals of ten and that just makes it so easy, no memorizing 16oz. in a cup or 5280 ft. in a mile or 12 inches in a foot, that stuff just makes no sense. Give me some millimeters and kilograms any day of the week! :)

[Snyper731]

If you have some torx wrenches they work because even if the thing is stripped the torx wrench uses the walls of the screw.

[Ded]

METRIC RULES!!! WHOOO!

[Silent Knight]

LOL

[pr0kch0p]

Originally posted by poiuyt
its a &^%&ing allen wrench!!! It would only cost like 1.00 for a set of bent metal!

dropzone = bent metal with some extra bent metal which can slide on the larger piece of bent metal . . . it costs $50

[yo]

Originally posted by Snyper731
If you have some torx wrenches they work because even if the thing is stripped the torx wrench uses the walls of the screw.

are you trying to sell someone something? you sound like an infomercial...

[Savior]

Ask your neighbors if they have some that you can borrow... most likely they do.

[Ded]

thanks for the help guys. I went down to the hardware store and it cost me $1.25 to get all the allan wrenches I need. Now I am set for life!!