trinity reg?

[oRan6ecRusH]

i would like to put a trinity reg on my impy but im not sure if it will work that good i think the trinity is a good reg or so iv herd but im not sure so thats where you come in thanks for your help

[The Legend]

You can't mount a trinity without excessive machine work. The threading in order to mount it on an Impulse is completely different than mounting it on a matrix.

I'd recommend a Palmer Rock for an LPR, they've proven the best in my experiance.

[oRan6ecRusH]

where can i get one and how much

[The Legend]

Any store that carries any cocker parts will have rock regs. Just look around a bit.

[oRan6ecRusH]

what will i heed for a rock reg to fin on an impy

[SYaNide SmurF]

go to www.e-paintballoutlet.com and look at the eclipse **** they have a complete "thing"

[pollacjw]

The internals of a trinity are the same thing as an ANS II. If you want it just get an lpr mod and add the ANS.

[The Legend]

Yep, Jackhammer's and trinity' are almost the exact same. I still like rocks better though.

Do a search for "Lpr Mod," it will tell you everthing you need to know.

[oRan6ecRusH]

will the LP mod eliminate the use for a maxflo cuz i have a preset tank and i want a reg that will replace the maxflo for a number of reasons

[i like tictacs]

dude

you are the third most annoying person in this forum.

1. kody 98 custom
2. paintballer4life
3. you

just keep the maxflow and shut up. and dont be so retarded, it might do you a little good to read some of the other threads on this forum about LPRs (theres about 30 within the next two pages and this one). So please.

[cris8762]

tictacs...............

word:D

[oRan6ecRusH]

HOW about both yu shut the ****' up im just trying to lern ****' so dont be such a ****' about it i just wana lern about regs and if you dont wana help then dont post anything back ***' whole there are people on this forum who can help and not critisize

[pollacjw]

No you back up- you came and asked obvious questions.

Next time READ THE FREAKING FAQ FIRST, NEXT SEARCH FOR YOUR TOPIC. If you don’t find it here, try pbnation.com.

See your problem is that you don’t have a questions, rather you just want some attention. Ill be happy to give you some. Just come to my field and ill give you all attention that you ever need.

And ticktacks is correct. You are possibly the most annoying person on the forum. But worst of all you just dont ask dumb questions. When people suggest something you disregard it.

Strait up what is your problem? Are you impaired?

Back to your questions (ill get both of your topics) -

Replacing the max flow inline reg is silly. 1) Its on the gun stock, 2) its awesome for HPA or Co2. Its only downside is that its not the most ergonomic.

2) Nothing you do will replace your inline reg unless you go to a Max flow 3000 or 4500. Now those are Tank-reg setups not inline regs.

3) LPR mods are air isolation mods they increase efficiency and can lower bolt pressure. if used correctly. Any cocker threaded LPR can be used on a LPR kit. Trinity regs are for Matrixices (sp) and will not work.

YOUR INGONORACE IS ENCYCLPEDIC

[ScorpionShutt]

Originally posted by pollacjw

YOUR INGONORACE IS ENCYCLPEDIC

Wait... I think you mean Dictionaric...


Get the rock, like legend said "best" it seems to be the best.
I have it on 2 of my cockers and it works great.


AND you be happy with your 110 max flo!!!

[DasBaldDog]

Originally posted by oRan6ecRusH
HOW about both yu shut the ****' up im just trying to lern ****' so dont be such a ****' about it i just wana lern about regs and if you dont wana help then dont post anything back ***' whole there are people on this forum who can help and not critisize

Watch your language, junior.....

I know he antagonized you but that is not the correct way to go about handling it.

[oRan6ecRusH]

yea i was just angre because everyone has been helpfull iv used cockers, force 5 cocker,angels,but impys are my newest and iv been out of the sport for while so i need to get reinformed about everything sorry if im asking dumb q's but i wont to be sure befor i spend some money

[The Legend]

No, the rock will not replace your max flow. The rock is a low pressure reg. While Imp's are "low pressure," they run about 200psi. Rocks work from about 20 psi to 100psi. The rock is used to regulate solenoid pressure, not valve pressure.


Tic Tacs- Take your own advice, shut up. You don't own this forum, you dont say what goes on here. You have no right to flip out on people, you aren't god. Yes, some people ask lots of questions. Yes, it gets annoying sometimes. But what do you think the best way to get them to STOP asking the same question over and over is? Answer it.

[Weasel00]

As much as some people say the LPR is great, I have not seen any advantages to it. I just took a LPR off a Rat this weekend because it wasn't doing any good. We tried several different setups. The only thing we didn't do was change the ram (I think that would be a good investment also if you are using a LPR). His rat would also spike. I have never seen an Impulse spike, until he got his rat with the LPR. Just get a tape worm and run your pressure lower.

Jared

[The Legend]

Wha reg(s) did you use on it? Old/new? It probably just needs a break in.

[Weasel00]

It came with a Kapp rhino reg. It has been removed and may not be put back on. I might do some experimenting with it, but I am sure he will not put it on his Impulse again.

Jared

[The Legend]

Grab a larger (IE- No Sonic or Tickler regs, they dont have enough volume) reg that has been on a cocker for a while, or grab a new rock.

Trust me, LPR's are by far the best upgrade for an Imp, don't give up on it so quickly.

[DasBaldDog]

Tickler's been working for me so far.

[Weasel00]

I don't see any real big Benefits on a Vsion Impulse. The main reason for a LPR is so it does not chop and better effeciency. (That I can see) His is effiency is already good and free air is no problem.

Jared

[The Legend]

The goal of an lpr isnt to eliminate chopping, however it was an added bonus in my case since my vision worked maybe 50% of the time.

It helped a lot with kick, consistancy and efficiency on my gun. It just allows the whole setup to be fine tuned more. If the gun shoots good without it, I agree, don't change. However it helped my imp a lot.

Das- If it works it works, I just dont trust something with such low volume to feed my solenoid.

[Weasel00]

When I put the tapeworm on this weekend it was very consistant. A lot more consistant than it was with the LPR. Like I said it may take some upgrades to get the setup to work correctly all of the time. All he had was the Brass hammer and stock ram and Delrin bolt. I am thinking about putting it on my eclipse with TI hammer and PC ram and delrin bolt. I know my ram will cycle a lot lower than 100 psi setup like that.

Jared

[The Legend]

I'd be careful with too light of a hammer/bolt setup. Sometimes you cant get good velocity with a light setup like that. It's worth a try, but it might be a costly 'test.'

[Weasel00]

I have been running it that way for about 4 weeks. I can run at 100 psi and get about 500-600 shots of a 68ci 3000psi fill. If you ask me I think that is pretty good. It isn't a light setup. The TI hammer is heavier than the Aluminum hammer, but lighter than SS. It works great. I have not seen any problems. It may not work well with a LPR, but it might be worth a try.

Jared

[The Legend]

Originally posted by Weasel00
I can run at 100 psi and get about 500-600 shots of a 68ci 3000psi fill. If you ask me I think that is pretty good.


Hate to break it to ya, but thats worse than my matrix. And everyone knows matrices aren't efficient.

[DasBaldDog]

Dude.... that's like in Shocker country there.....

[Weasel00]

I know it is worse than a matrix. A matrix also runs at almost 200 psi. I was stating that it was pretty good for it running at 100 psi. I get great efficiency running it at 150psi, I was just experiment being able to run that low.

Jared

[The Legend]

Ah, I thought that was your normal OP.

Nevermind. :)