Picture Thread (ONLY)

[Sid]

Post your M3/Pi marker here. No banter, as that is what the rest of the forum is for.

[Surreal]

booo sid booo! you stole my first pic slot! nooooo!! :D hehe

[weefek]

me third! YAY!

[EliteBoris]

Oh here is the pic i can't find it so go here.
www.angelfire.com/dc/coz/pictures.html

[paintballpride]

ok this is the first step for me..i am getting a barrel very very soon.. also a 12 vlt revy with x-bored.. ne thing else?

[PBkid22688]

Pi-E2 Black Draun LCD with 12 volt revy and 14 inch Chrome Cp Barrel.

[paintballpride]

ok this pidture i painted my barrels.. with u cant really see cause of bad lighting #1 and because it is to far out but u can still see it so it looks really cool in real life. if u wana see better pictures --im me at "abc 123 its eazy"

[FinnMcKool]

M3 BD LED, Revvys on the way along with a new barrel and better DF

[FinnMcKool]

http://www.pbreview.com/forums/attachment.php?s=&postid=588764

[PBkid22688]

For an average 14 year old this is not bad

[pbfreak135]

This is my Black Dragon paintball marker. I have a 9in custom barrel, drop forward, 12volt Revy, 68 3000 Fiber Warped Crossfire Nitrogen tank and a Rase tank cover. And my next upgrade is a Air American reg and a blade trigger.:Dbd

[THE LAW_DM]

check out that custom anodoized trigger, made by the cool kid with the wheel chair, Franco Prado.

[paintballpride]

this is my baby. *blue title wave*....get washed away
i know i know i need a revy.. im acualy buying a richechienmsd[p how ever u spell it richeche ak for 50$ so thatll be nice and i am getting a system x barrel and a new bolt.. deff.. ne ways i think it looks cool and i maid the drop.. i think that looks pretty tight but i dont really care if u think it looks bad..:| ne who .... ok bye..

[richarddufault]

16" CMI barrel, Mach 404 loader, Spyder vertical expansion chamber, coiled remote. All the cheapest stuff together still makes for a marker that can burn up the paint.

[JeKyL]

Since I don't have a digital camera I had to make the pic of what mine looks like. As soon as I get a digital I will post a good pic of it.

[coyotekat3]

Heres my Dragun.....

[chrisjfrank]

http://www.fralker.com/images/My_PI-E2.jpg
__________
PI-E2
12v Revy
NW Paintball Produts Custom Rise
12" SP Progressive Barrel
Check-It Stick Trigger
4 Ball Pin
NW Paintball Products On/Off Drop Forward
68ci Steel Pure Energy HPA

[gat_blaster]

=)

m3 LED : 32deg ice cold 14" : pmi pure energy 45/4500 : ricochet ak

[marduck]

basic

[skidmark414]

my cat with my gun

[KevinOwns]

:)

[LeGeNDse]

Sitting in the closet now

[FinnMcKool]

I like that chrome led.

[BeerPimp]

Just got my Powerlyte Sceptre barrel.
http://home.neb.rr.com/beerpimp/images/dragun.jpg

[Crash Danger]

Originally posted by BeerPimp
Just got my Powerlyte Sceptre barrel.
http://home.neb.rr.com/beerpimp/images/dragun.jpg

is your drop forward and grip frame really gold or is that just a reflection?

[CaustikSpecies]

my m3 patriot stars and stripes

[Dakkon]

heres mine stock after going to sherwood for a day (and i cleaned it to)

sorry about the sizehttp://www.dakkon1.netfirms.com/pbgun2.JPG

[Intelliphreak]

Sorry for the crappy pics....

M3 Sniper pretty much stock:)

[Intelliphreak]

Trigger Frame & LCD

[Intelliphreak]

With rico 2k and 47ci 3000 tank (not pictured)



And BTW.....nevermind the back poster :D

[Gastric]

M3 Sniper (stock)
10" J&J Edge barrel kit
68/4500 "old style" MaxFlow
Smart Parts dropforward
12v X-Board Revolution


The MaxFlow isn't mounted to the grip yet. Awaiting delivery on my grip adapter, quick release pull pin, and 32 Degrees spring kit from www.paintballgateway.com

In it's stock form the marker appears to cycle well at 550-600psi. However, I haven't taken it to the field or chronograph to see what kind of velocity I'm getting.

http://www.cgraham.com/chris/paintball/m3/sniper_001.jpg

[xXhappyAznXx]

new black dragun...

[bartman]

My new Black Dragun

[Gastric]

M3 Sniper
M3 LCD metal trigger
VL Evolution 2
J&J 10" Edge Kit
68/4500 MaxFlow
Smart Parts drop forward
32 Degrees Spyder drop forward adapter
Quick release pull pin


http://www.cgraham.com/chris/paintball/m3/sniper_002.jpg

[Gastric]

You can purchase this from www.paintballgateway.com It definitely makes breaking down the marker faster and removes the risk you'll lose the silly cotter pin. However, it's quite large and the pin doesn't seem to fit quite as snugly into the hole. However the pin is round as opposed to hex shaped so it seems to fit into the round groves in the end caps better than the hex pin which seemed to be digging into my end caps slightly.


http://www.cgraham.com/chris/paintball/m3/pullpin_001.jpg

http://www.cgraham.com/chris/paintball/m3/pullpin_002.jpg

[Gastric]

This thing is pretty large and does not come stock with screws. However, it's only $6 or so (one my local field's pro shop) and I bought the screws from Home Depot for $0.54.

http://www.cgraham.com/chris/paintball/m3/32deg_spyder_adapter_001.jpg

http://www.cgraham.com/chris/paintball/m3/32deg_spyder_adapter_002.jpg

[tonysk83]

very nice dragun. thanks for shwing me that pick next time i go to my shop ill pick one of those up, tahts jsut really an autococker quick strip pin

[skidmark414]

With a few home mods (paper and tape) I got my pull VERY short with no forward or back play. Paste the link: mycatbites.tripod.com/triganim1.gif

[Bionic_show]

Black Dragun Basic
Xboard 12v revy
14" J & J Ceramic Barrel
Custom trigger Job
Custom Hose Job

Alot more upgrades to come but I simply love my gun just the way it is.

Bionic :D

[skidmark414]

Finally, I can post it.

[FinnMcKool]

I used hocked tape skid, makes it an unbelievible pull. Crappy thing about tape is oil goes on the trig after a day and the tape starts sliding off.

[BD-freak]

:D Here's my marker

- BD Compact Blue
-Twisted Volumizer
-32 Degrees 6 Stage Expansion Chamber
-12 oz C02
-X-board Revvy
-Custom made drop forward
-Macro line

[Synchronium]

heres my old gun. i sold it so i could buy a sniper

[CaustikSpecies]

wow, what is the wretched peice of metal posing to be a barrel?:eek: :rolleyes:

[FinnMcKool]

The one in the link I posted?

[CaustikSpecies]

yea

[FinnMcKool]

How so? It just looks like an old style AA with less porting, for alot cheaper.

[kaibutsu]

M3 Sniper:
Halo B, 20" TASO Stone Cold II
CIP Delrin Full Force Bolt and polished OEM striker
Polished TASO turbo valve with Spyder Madman valve spring
Bob Long Torpedo Regulator
CIP striker spring kit
PE 48/3000 HPA
Air America Raptor 114/3000 on HPA with remote
System X drop forward with on/off ASA
Steel braided hoses with quick release
4-ball quick release pin

High compact: Semi only
9V Revvy
12.5" 2 piece M3 barrel
M3 Stars and Stripes drop forward
M3 Gas thru foregrip
M3 regulator
Polished bolt with removed venturi
Polished OEM striker with MaddMann hard spring
Polished OEM turbo valve and MaddMann medium spring
New o-rings from a Spyder first aid kit
Same tanks as the Sniper


Pic might work:|

Link to the pic! (http://groups.msn.com/drealgsr/turbocrap.msnw?action=ShowPhoto&PhotoID=160)

[skidmark414]

Eek! What were you thinking when you got the 20" barrel?

[FinnMcKool]

yeah what were you thinking? must be hard on air with that thing is it?

[kaibutsu]

I got it cheap and it's pretty damn accurate with marbs! It worked just fine at 550psi and I will be trying it at 300psi tomorrow. I have other barrels so I don't see what the big deal is about??!!

[skidmark414]

That's good. You should have other barrels.

[GoalieKeg14]

M3 Patriot Sniper
TASO Turbo Valve
BL Torpedo Regulator Chrome
Dead on Pro Blade Drop Foward w/on-off
CIP Full Force Bolt W/snap back
Freak Barrel
Modified Trigger Pull
68ci 4500psi PMI nitro Preset, 16oz Co2
Black Macroline
12 Volt Xboard
Looking to get:
Titanium polished Striker
New Valve Spring
Eggy 2
New Freak Fronts!

I'll Try to get a pic up here soon!

[tonysk83]

usually dude you post a pic with your setup, because if everyone did wha u did we would have no pics, so anyways heres a really really nice BD

[the_outlaw250]

Heres mine soon to have warp.:cool:

[Crash Danger]

Originally posted by the_outlaw250
Heres mine soon to have warp.:cool:

what did you do to your trigger! :eek:

[the_outlaw250]

I broke it off. I can shoot faster with a single finger trigger. I had a cocker before I traded it for this.

[skidmark414]

You traded a cocker for a BD?

[tonysk83]

i sold my cocker and bought a BD worst mistake i have ever made

[the_outlaw250]

heress an updated pic

[Botswanaman7]

Here's my Basic..I love it...soon to have a Ricochet AK! http://www.hunting-pictures.com/members/98CUstOMizER/bdpic.jpg

[adamholz18]

here you all go a nice and classy joint.

[scotty2naughty]

This is my dragun, sorry for the bad picks. I couldn't get the revy one because the feed neck broke...again, I use a 12oz tank with it.

[wulf1010]

well this is my dragun with its tank as soon as i get a new reg for my matrix the center flag thats on it is going to the dragun...........

[younggun23]

Heres my Black Dragun:

http://hometown.aol.com/marrill23/myhomepage/profile.html

[bluedragun]

yeah check it out i even got ducktape on that joker beat that haha that trigegr was a paint to put in i reckomend dont get a new trigger get a new gun, i need new bolts b/c the old drop forward bolts arent long enough to go in my sprint trigger. im still updating to try and compete with my friends amg :(
http://www.geocities.com/zc033/paintball.html

[B0mb3r[M]an]

Well heres my new 2003 lcd im really happy with it (really happy):D

[ItalianStalion]

Here is my M3 Sniper ive done pretty much every home mod that can be done to it

[kokak]

Here is my latest Dragun Project Marker ...

http://www.kokakpaintballs.com/images/BD.JPG

[private_js]

Here is a link to the page where I have my gun. Check it out it is sweet.

Jody :)

My Tricked out Dragun. (http://www.geocities.com/hellhoundspaintball/Jodysmarker.html)

[Zujin]

http://www.hunting-pictures.com/members/Zujin/sniperbig.gif FInally found a host

[pblover101]

Sorry i posted wrong.

[pblover101]

Here it is

[GoalieKeg14]

Originally posted by pblover101
Here it is


Where is it?

[scotty2naughty]

Heres one.

Blue Black Dragun Compact
12" SP Progressive
16oz stubby tank
12v Revy

[PRPBlackout]

Black 2003 LCD Black Dragun with evlution ll and crossfire 88/4500.
http://mywebsite.register.com/db5/00459/blackoutpaintball.com/_uimages/marker001.jpg

[SkunkTeeth]

http://www.dslextreme.com/users/skunkteeth/paintball_gun.jpg

[private_js]

Finally I have my gun finished. This will be my back up as I am buying an angel speed next week.

My Marker (http://www.geocities.com/hellhoundspaintball/Jodysmarker.html)

[wulf1010]

A marker i made for a friend......not really sure if it could be called a dragun but what the hey its got the trigger frame and barrel

Bob Long Millennium silver splash body
Piranah g3 flush cocking internals
Dragun Lcd trigger frame in chrome
CIP red stick trigger
32Deg twisted exp chamber
32Deg flame drop
12vt Xboard revy
68/3k crossfire hpa tank
Lapco vertical adapter with custom shroud
M3 two piece barrel........yes it stock dragun but it shoots hella nice
Taso trubo valve
complete internal poslishing
and yes blue macro......cause i stole his black macro for my timmy

[GoalieKeg14]

5 MP digital camera!!

My crappy guage.
http://www.*******s.com/kegspaintball/Bustedguage.JPG
I Love Marbs.
http://www.*******s.com/kegspaintball/Gun1.JPG

http://www.*******s.com/kegspaintball/Gun2.JPG

[GoalieKeg14]

More....


Doesn't my gun look a little like a timmy from this angle???
http://www.*******s.com/kegspaintball/Guncclose.JPG

http://www.*******s.com/kegspaintball/Gunclose2.JPG
OoOo, Multicolor!!!
http://www.*******s.com/kegspaintball/NiceHopper.JPG
Ya'll like the trigger mod???
http://www.*******s.com/kegspaintball/Triggersmall.JPG

[snipers002]

http://hometown.aol.com/snipers002/myhomepage/photo.html

[paintkoop88]

Here's mine. Pretty stock and I need HPA. Sorry about the glare.






My God what happened?

Dont click!!!

[aaaaaaa]

WTF !?!?!

its just your hopper dude...

[Botswanaman7]

^^^DON"T CLICK!^^^

[Excalibur]

Sry Its dark...
:eyes:

[kapp719]

that is the finest hopper ive seen in my days of seeing hoppers

[homerj]

not mine anymore, but here goes anyway

[estakado]

I've seen some newb with this version

http://www.gijoes.com/graphics/product_images/p932466dt.jpg

[paintballer518]

that is made by gameface

[The Dark Knight]

I love my baby so much...but I recently got a new baby that I'm gonna test out...well...hope the pics look nice...

[The Dark Knight]

how do you upload multiple images??

[The Dark Knight]

this is the last one...i dunno why the pics aren't just popping up...

[BLKDragun11]

jjnj

[paintballer518]

its just the hopper

[BLKDragun11]

this is my gun

[BLKDragun11]

THIS IS MY TRICKED OUT DRAGUN

[BLKDragun11]

http://C:\Program Files\MultiMedia Navigator\Picture Navigator\Album6\THEPIMPDragun.JPG

[Woods Sniper]

http://img.villagephotos.com/p/2003-8/325531/Gun.JPG

Crappy pic for a semi crappy gun. But hey, it works! Can't wait to replace it with a Speed. :P

[paintballer518]

Originally posted by BLKDragun11
THIS IS MY TRICKED OUT DRAGUN

looks more like a tricked out pillow:D

[King-Smurf]

my black dragun compact

[SIGSays]

yup

[King-Smurf]

my new dragunfly

[paintballclub]

Here is my new '03 LCD before I got my hands on it, yes it was the gun used for the DirectPaintball.com review.

I added a 48/3000 tank and a 14" Dye Xcel barrel - no pics of that set up yet...waiting for my Egg II to arrive

[ZeroSkillet]

http://www.hunt101.com/img/043271.jpg
http://www.hunt101.com/img/043272.jpg
http://www.hunt101.com/img/043273.jpg

Theses pics are from when I first got it back like a year ago......I need new pics but the digi cam went bye bye when my 4 year old niece wanted to see if it can fly :)

[drakenfier]

sweet stand.. do you got blueprints lol i want to make one

[Kazik]

http://paintball.info.pl/images/baza_sprzet/912.jpg

[Feelthepain]

my dragunfly mech.
http://www.bstuff.com/uploads/post-14-1065326131.jpg

[bird]

My current setup. BD Compact, max-flo low pressure reg, benchmark gas thru grip, macroline kit, dop universal drop, shocktech low pressure chamber, check-it 15* assault block, maddman rocket valve, spudnukl low pressure bolt, spring kit, bizerk sniper pro barrel kit, m3 full function lcd trigger frame with a zenitram trigger.


http://www.neok.com/~bird/left%20side.JPG

http://www.neok.com/~bird/right%20side.JPG

[jonroboue]

palmer reg, 18 inch freak barrel, cp flame drop forward, 48 3000 pure energy nitro, 9v revy, cp barrel kit

[swift_mcvay_sty]

someone post a good pic of a TES

[#DragunVoid#]

All mine are too big. Email me TESMAN@pbreview.com

[evan123]

Email them to me and i will host them, just send like one or two. evanmcd24@hotmail.com

[creature55]

http://img.villagephotos.com/p/2003-10/429182/Picturekjhn.jpg
http://img.villagephotos.com/p/2003-10/429182/Picturekjn.jpg

[tyru]

Here's my TES, operates at 210 psi at 280 fps. See signiture.


My Stealth TES (http://www.freepichosting.com/Images/127513/0.jpg?x=1600)

[NC demolition]

here's my dragun

Edit:AHH! forgot pics

here ya go

http://img20.photobucket.com/albums/v59/M3pics/dragun.jpg
http://img20.photobucket.com/albums/v59/M3pics/dragun2.jpg
http://img20.photobucket.com/albums/v59/M3pics/paintball.jpg

[sk8brder67]

Here is my Dragun T.E.S. w/ One Kit

http://home.comcast.net/~sk8brder67/pics/marker1.JPG
http://home.comcast.net/~sk8brder67/pics/marker2.JPG
http://home.comcast.net/~sk8brder67/pics/marker3.JPG

[Demo_Dick]

Here is the link to some of my TES pics. More on the way.

http://www.geocities.com/welshenbaugh/

[Rebel2002]

Pretty nice, eh?

[jrbacon]

Grey T.E.S. with one kit installed, shocktech drop foward and super fly bolt, 32 degrees ASA, warp feed, Egg 2 with z board, ANS Gen-x2 regulator, J&J 16" ceramic barrel, and custom trigger switch


http://members.cox.net/jeremy.bacon/tes.JPG

[mmsspaintball__]

Here are some previews of some of the pic that can be found HERE (http://www.*******s.com/paintball__/pictures1.htm)

http://www.hunt101.com/img/093120.png

http://www.hunt101.com/img/093123.jpg http://www.hunt101.com/img/093093.jpg

http://www.hunt101.com/img/093115.jpg http://www.hunt101.com/img/093117.jpg

[SEE THEM ALL (http://www.*******s.com/paintball__/pictures1.htm)]

[King-Smurf]

my fly now

[macfights]

http://macfights.mypicgallery.com/?/smacfam/100-1189_large.jpg

http://macfights.mypicgallery.com/?/smacfam/100-1190_large.jpg

http://macfights.mypicgallery.com/?/smacfam/100-1186_large.jpg

[M3_Duck]

mine:

[M3_Duck]

another of mine with the back up e99 with boomy

[Durrell]

http://www2.freepichosting.com/Images/153328/2.jpg

http://www2.freepichosting.com/Images/153328/10.jpg

http://www2.freepichosting.com/Images/153328/1.jpg

:eek: aint she perty..and theres more to come in a few weeks..an IPI 3.0 chrome frame..14" 2 piece clear to blue fade Knockout barrel and Blue Dye ESP stickies:D

[Durrell]

oops..forgot the specs

Black Dragun Basic
Bob Long Torpedo Reg
12v revvy w/ x board
48/300 N2 with Redz cover
Psycho Ballistics drop w/ on off

soon to come..IPI 3.0 trigger frame-chrome
3A 2 piece Knockout Barrell-chrome to blue fade
Dye ESP Stickies-blue

[Skangar]

I have The best TES ever, Try to find a better one, seriously. YEAHHHHHH.:D

[Skangar]

Last one woooooot!

[Rebel2002]

Here ya go, Skangar:cool:

[Rebel2002]

And another...

[xaq]

:crazy:

[shonie73]

Originally posted by CaustikSpecies
wow, what is the wretched peice of metal posing to be a barrel?:eek: :rolleyes:

haha uve been sigged!

[shonie73]

well, u will be if it ever comes up...

[20bps_tes]

heres my 2 day old tes

http://sighost.caez.net/sigs/tespaintedgrips1.jpg
http://sighost.caez.net/sigs/tespaintedgrips.jpg
http://sighost.caez.net/sigs/tespaintedgripdragun.jpg
sry cam really sux!!:pissed:

[M3_Duck]

these are my draguns... two "the one" markers... notice the one with the cf barrel... thats a bad mutha... the other one is stock except for 50g switch, and painted grips... and finally there is my dragunfly lcd
http://www.trenzhost.com/files/m3_duck/IMG_2484.jpg
http://www.trenzhost.com/files/m3_duck/IMG_2485.jpg
http://www.trenzhost.com/files/m3_duck/IMG_2486.jpg

[M3_Duck]

here is my gun collection:

http://www.trenzhost.com/files/m3_duck/IMG_2482%20copy.jpg

[macfights]

My baby (http://macfights.mypicgallery.com/?/smacfam/100-1210_large.jpg)

[cruble]

I wanted to bring this marker as close to a timmy as posible.the high pressure reg has been replaced with a volumizer and the ram cycles at 100 psi, operating pressure at just over 210 and fires at 275 fps. in adition to the dualies and torp, I also have a lasoya bolt installed and a clamping feed neck on the way. the grips have a green fade and phantom flames.

[cruble]

another

[cruble]

grips

[paintballr87]

cruble all I have to say is WOW that is so sick stuff man, Very Nice :D

[TESballer]

how did u do that i could barely paint my grips black

[cruble]

Tape up frontof grips and edges, tape the lcd window lay the grips down so that the inside is pointing up, if you are doing a fade put your darkest color on first i used black, heavy at botom then held can farther away about mid way up the gip. Let it dry, next I used a can of moddle car spray paint (walmart) transparant green, and finished painting. Let that dry. then used rustoluin high luster laquer to seal it up.let dry remove the tape and there you go. You can use this technique for x boxes and all kinds of stuff.

[Mongoose87]

its all over the whole forum. Ive reported them all and pmed the mods that are on.

[M3_Duck]

new parts new parts... bleh... stupid lightning drop, the stock dove dont fit... BAH!!!!!! oh well good reason for a on/off

gun with new macro fittings (dont knock the large one on the torpedo, its coming off as soon as i can find the darn 90 swivel one i have)

http://www.trenzhost.com/files/m3_duck/IMG_2488.jpg

work bench... notice the acrilic??? all free from work... building a gun holster for between games at the field... guess what colour i like...

http://www.trenzhost.com/files/m3_duck/IMG_2489.jpg

and now leh stupid drop:

[IMG]http://www.trenzhost.com/files/m3_duck/IMG_2490.jpg

[mudhog92]

My TES with Q Loader and Palmer. runs CO2

[ReaLe[e]LAZY]

Originally posted by mudhog92
runs CO2

You spent the money for a q-loader but you didnt get nitro?

[schoolsukz08]

Originally posted by ReaLe[e]LAZY


You spent the money for a q-loader but you didnt get nitro?

Maybe his feild doesn't fill it. :idea:

[TESballer]

he has a palmer so hes cool

[tekracerx]

Originally posted by ReaLe[e]LAZY


You spent the money for a q-loader but you didnt get nitro?

Qloaders arent that expensive anyways. They start at $80 (price of an eggII) and go up to $140 (price of a Halo B or reloader b)

[argonna]

http://thewolfweb.com/photos/00263357.jpg
http://thewolfweb.com/photos/00263355.jpg

old skool dragun

[Nitto]

http://www.nittos-place.com/Pics/gunTES2.jpg

http://www.nittos-place.com/Pics/gunTES.jpg

[unknownpsycho]

http://people.clemson.edu/~chrisw/images/TES.jpg

[20bps_tes]

http://hunt101.com/img/144920.JPG http://hunt101.com/img/144919.JPG http://hunt101.com/img/144923.JPG :D

[mry7]

http://www.angelfire.com/ultra/shootpaint/mytes2.jpg
http://www.angelfire.com/ultra/shootpaint/mytes3.jpg

[joepeps]

http://www.angelfire.com/darkside/nhlonline/Picture_002.jpg

http://www.angelfire.com/darkside/nhlonline/Picture_003.jpg

[coldfinger]

NOt mine but a cool flyhttp://www.hunt101.com/img/124566.jpg

[baka]

New pic
http://www.pbnation.com/showthread.php?s=&postid=5447079#post5447079

[schoolsukz08]

http://pic8.picturetrail.com/VOL253/2093839/4064102/54018099.jpg

My ol' BD, CP 2-piece is about all I've added to it. Just to add this is one of the best spyder clones I've ever shot. Very consistent too.
Not sure if its the stock reg or my centerflag tank but I love her. :D The dye cover should come Thursday. I will be picking up a new hopper and Slasher (When ever they come out.)

[BustNBallsKC]

http://img76.photobucket.com/albums/v230/DragunflyMechKC/c516d7ce.jpg

[m3drgaunman]

m3dragun sniper electronic gun
evo2 electr hopper
new trigger frame with new trigger
new pmi regulator
freak 14 in barrel (soon)

[PimpedJT3.5]

UPDATED:
http://img64.photobucket.com/albums/v195/pimpedjt3.5/fly1.jpg
http://img64.photobucket.com/albums/v195/pimpedjt3.5/fly2.jpg

[jdolla]

http://img78.photobucket.com/albums/v292/hijisheer/TES.bmp

Sorry about the crappy pic

[FL Native]

http://flatravel.net/O3blue.jpg
http://flatravel.net/O3dark.jpg
http://flatravel.net/O3full.jpg
http://flatravel.net/O3grip.jpg
http://flatravel.net/O3light.jpg
http://flatravel.net/O3side.jpg
http://flatravel.net/O3top.jpg



my O3 signature series you can see
that it looks kinda blueish in some light and silver in others also showing
the lcd in dark and in light

[808BOWL]

heres my mongoose w/one kit
http://img64.exs.cx/img64/6916/mongoose1.jpg

[homerj]

http://www.hunt101.com/img/199315.JPG
http://www.hunt101.com/img/199320.JPG

14" crossfire punisher barrel
ogi clamping feedneck
apm tigershark bolt
wgp ergo reg
psychoballistics medium bullet drop
dye 300 psi micro guage
dyed grips

[freehand]

crappy pic of my tes

[freehand]

My tes and some of my gear

[z0n3d0u7]

All my marker's. [Only have one of the VL's left, And my TES.]

http://memimage.cardomain.net/member_images/12/web/384000-384999/384752_84_full.jpg

Left to right:
Green Spyder Imagine, Blue VL "Orion", Black Spyder Imagine, Black TES [Stock, colored grip's], Blue VL "Triton II".

http://memimage.cardomain.net/member_images/12/web/384000-384999/384752_92_full.jpg

http://memimage.cardomain.net/member_images/12/web/384000-384999/384752_96_full.jpg

http://memimage.cardomain.net/member_images/12/web/384000-384999/384752_95_full.jpg

http://memimage.cardomain.net/member_images/12/web/384000-384999/384752_94_full.jpg

[wakeupandbord]

The file is too big so I put the gun on my website, so heres the hyperlink Dragun TES (http://www.*******s.com/teamdarkthunder/mygun.htm)

[Avery_mac]

nice

[shonie73]

http://case.jpg
http://drally.jpg
http://drallion.jpg
http://drallion2.jpg
http://setup.jpg
http://frontblock.jpg

[shonie73]

some more

http://frontblock2.jpg
http://trigger.jpg
http://backblock.jpg
http://side view.jpg
http://milling.jpg

[the1]

thats one sick the one!

[the1]

nice set up! hows the c.p barrel?

[the1]

how did you dye your grips they are awsome , and where did u get that feed neck?

[the1]

thats not a dragon?

[the1]

that bolt id HUGE cut that mo-fo otherwise nice gat

[the1]

those are awsome where do u get them??

[20bps_tes]

STOP POSTING TEXT

http://img.photobucket.com/albums/v225/tessypix/50pix.jpg
http://img.photobucket.com/albums/v225/tessypix/50pix1.jpg
http://img.photobucket.com/albums/v225/tessypix/DSCF0047k.jpg

[xshock]

Brand new mostly stock TES with progressive barrely and empire reloader and OGI clamping feedneck

http://www.imgmag.org/images/crossfire/107_0709.JPG

[C-RaD]

Heres Mine Click avatar Below for pic if you want a better 1 im me!!!!

[Evilspyder]

Heres My TES....

[Evilspyder]

heres my TES....

http://members.aol.com:/Evil11214/tes132456.jpg

[C-RaD]

Heres my TES

[C-RaD]

other side

[C-RaD]

sorry if its a little fuzzy but its he newst one!!:crazy:

[sspb09]

heres my gun it's pretty much stock except the barrel . . . mine is the one on top the one on the bottom is a teammates

http://www.*******s.com/scarzandstripes/thecrew.htm

[joeycollette]

crappy pic but its a good gun

[joeycollette]

go to www.hofibertrends.com/paintball and post ur pics on the msg board

[SolidSnake4864]

http://C:\Documents and Settings\Owner\My Documents\Picture 051.jpg

http://C:\Documents and Settings\Owner\My Documents\Picture 002.jpg

http://C:\Documents and Settings\Owner\My Documents\Picture 001.jpg

[TESballer]

lol you linked it to your computer you have to host the pics somewhere buddy

[ChaChuShady]

DOUBLE TROUBLE my dragun isnt finished yet so...

[rmdiablo]

heres my black dragun compact that I customized myself. All of the upgrades done to it were made by me. All except the palmer reg. The drop, and volumizer were made by me. If you would like to know how i made the volumizer, just pm me. I also did some other high flow mods and stuff to the bolt to make the gun shoot farther.

[rmdiablo]

heres a closeup of the volumizer i made.

[ChaChuShady]

My new still unfinished dragun...tigershark comin soon and a new TES-gray comin soon and im going to swap the parts around :P
http://img83.exs.cx/img83/1623/DragunTimmynew.jpg

[Techart27]

Heres two pictures of my TES

http://image20.webshots.com/21/2/56/66/218425666olPHTz_ph.jpg

http://image22.webshots.com/23/2/50/44/218425044qNHroa_ph.jpg

[ChaChuShady]

u damn right thats my gray tes i said was comin
http://img99.exs.cx/img99/7/DragunTimidator.jpg

[sspb09]

here it is . . .

[SpyderPride]

http://img.photobucket.com/albums/v230/SpyderPride/DSC00141.jpg
http://img.photobucket.com/albums/v230/SpyderPride/DSC00142.jpg

Bow down, fools.

[S&S33]

My tricked Torid X. Freak not in picturehttp://img.photobucket.com/albums/v358/Preluderacer33/andy.jpg

[a031363]

I assume Odyssey markers can be posted here also! Here is my work in progress, an Odyssey O3X.

[UAreNotMyFather]

Here's my TES. Everything is stock except for the J&J and, obviously, the Q. Had about 500 rounds through it. I'll be selling the marker in it's bare stock form if anyone is interested (I just decided I wanted the O3 instead, and placed an order yesterday).

[miotch]

My D-fly LED
up'd -

Nexus ram
QEVs
Torpedo Reg.
Low pressure springs
DYE Drop
Stock Cocker Pump arm

*i know i need to get rid of that ugly steel braid hose!*


http://kaptainkrunch.mypicgallery.com/cockers-n-stuff/dragunflyled_large.jpg

its all chrome , the gun body is silverish.. the camera flash made some stuff look black =(

[EVILDaddy07]

http://photobucket.com/albums/v229/EVILDaddy07/?action=view&current=100_1229.jpg&slideshow=true&interval=3

[EVILDaddy07]

herehttp://img.photobucket.com/albums/v229/EVILDaddy07/100_1225.jpg

[EVILDaddy07]

http://img.photobucket.com/albums/v229/EVILDaddy07/100_1225.jpg

http://img.photobucket.com/albums/v229/EVILDaddy07/100_1229.jpg

http://img.photobucket.com/albums/v229/EVILDaddy07/100_1228.jpg

http://img.photobucket.com/albums/v229/EVILDaddy07/100_1226.jpg

ok heres the rest.

[slikna99]

Spyder gone TES.... Soon to come a badge saying something .... not sure what.

http://img.photobucket.com/albums/v126/slikna99/PICT8598.jpg

[a031363]

I upped mine again, it now has Zeni Trig, Torpedo Reg, Unimount, J&J Edge Barrel Kit, Ripped Halo B a/Victory, Crossfire 68ci Fiber Tank:

http://img136.exs.cx/img136/2929/odysseysetup24ep.jpg

[jcabes]

mines comin soon buddy...ur gonna have to watch out

[coronaroach]

just got it a couple of day ago ,

[TESPlaya50]

http://img.photobucket.com/albums/v230/DragunflyMechKC/DragunflyandTES005.jpg

[a031363]

Swapped out my black Torp reg for a red CP reg. Which looks better, this one or the one 4 spots up ^^?
http://img177.exs.cx/img177/1320/o3setup9py.jpg

[PBTado]

my TES (TESY) :) T-Board comin soonhttp://img22.exs.cx/my.php?loc=img22&image=mvc064s4es.jpg

[teswkit]

my One look in sig

[L337 krew]

lexblade in the mail. goin to get it powder coated soon, what color/s do u think i should get it done in. hahaha yes that is a 16oz CO2 tank:P
http://img.photobucket.com/albums/v236/ncsgoofy/Picture003.jpg

[Pattawa]

http://img.photobucket.com/albums/v692/pattawa/Drallion.jpgand
http://img.photobucket.com/albums/v692/pattawa/drallion2.jpg
Soon comming t-board
nexus kit
reloader B
Dye boomstick or ultra light
cp reg
any other sugestions?

[DutchHobo]

http://www.hunt101.com/img/253612.JPG
http://www.hunt101.com/img/253613.JPG
http://www.hunt101.com/img/253615.JPG
http://www.hunt101.com/img/253617.JPG
http://www.hunt101.com/img/253620.JPGEnjoy :)

[xsuperflyaznguy]

I present to you a hundred dollar grip.
http://img.photobucket.com/albums/v237/XsuperflyX/DSC00259.jpg
http://img.photobucket.com/albums/v237/XsuperflyX/DSC00258.jpg
http://img.photobucket.com/albums/v237/XsuperflyX/DSC00256.jpg
I think im the first to do this. Correct me if im wrong.
Oh and there is much more to come.

http://img.photobucket.com/albums/v237/XsuperflyX/Picture031.jpg
http://img.photobucket.com/albums/v237/XsuperflyX/Picture033.jpg

[keith6945]

http://img.photobucket.com/albums/v708/keith6945/1.jpg
http://img.photobucket.com/albums/v708/keith6945/2.jpg

[wulf1010]

hehe heres my drallion in most of its glory, its still waiting on its slik bolt and black macro line but thats it everything else is there, OH except a t board gonna order that in a week.

http://www.hunt101.com/img/257241.JPG (http://www.hunt101.com/?p=257241&c=500&z=1)

[C-RaD]

New pics of my tes
http://www.pbvidsupload.com/upload/tes.jpg
http://www.pbvidsupload.com/upload/t1.jpg
http://www.pbvidsupload.com/upload/IMG_0036.JPG
http://www.pbvidsupload.com/upload/IMG_0038.JPG

[sspb09]

My new updated picture -

[jhbishop]

Here's my Dragun etc.
Does anyone have an extra regulator. I'll pay shipping.:)

[JD-Fuel]

Cuz Im_Addicted is to lazy to buy a digital camera heres his TES!:rolleyes: Might I add its my nitro!

http://i2.photobucket.com/albums/y2/JD-Fuel/PB%20Rev/tes.jpg

[I'm_Addicted]

Originally posted by JD-Fuel
Cuz Im_Addicted is to lazy to buy a digital camera heres his TES!:rolleyes: Might I add its my nitro!

http://i2.photobucket.com/albums/y2/JD-Fuel/PB%20Rev/tes.jpg

Yeah thats my TES!!!!:cool:

[wulf1010]

Picture of my Drallion with the valve cover jeweled, easy process and makes plain aluminum look killer slick (im actualy gonna polish it off and do a better job, ill edit pic then)

http://www.hunt101.com/img/260742.JPG (http://www.hunt101.com/?p=260742&c=500&z=1)

[fmenton66]

Here is a picture of my O3M. Still working on it though.

Added:
04 Racegun Frame
Palmer Micro Rock
Freeflow Ram with QEV's
Freeflow SS Hammer kit with Rex dialer
Rocket Valve (works so far, use valve for the ONE)
Q-Loader
CCM Black Straight pump arm

Still to add:
AKALMP 2-Liter regulator with 1 3/4" extension
Check It UniMount

[m3_dragUnflY]

well hre is mine its a electric dragunfly and i like. its works for me! And i am soon to get a rwarp feed, halo b, and a new barrel. oh and a phsycoballstics bullet drop!

http://img85.exs.cx/img85/593/mydragunfly8rg.th.jpg (http://img85.exs.cx/my.php?loc=img85&image=mydragunfly8rg.jpg)

[wipers suck]

Here is my TES :D

http://img.photobucket.com/albums/v341/paintballer033/PICT0718.jpg
http://img.photobucket.com/albums/v341/paintballer033/PICT0717.jpg
http://img.photobucket.com/albums/v341/paintballer033/PICT0716.jpg

[wolf'sRevenge]

specs in sig
[img=http://img61.exs.cx/img61/489/dscf06689qz.th.jpg] (http://img61.exs.cx/my.php?loc=img61&image=dscf06689qz.jpg)

[shaunzy]

http://i4.photobucket.com/albums/y112/teamrenegadespaintball/SHAUNZYSGUNSETUPPICFORSITE.jpg

[sureshot30]

I didnt but my new gauge on here or my barrel

[half-step]

My T1.

http://www.rivervalleykarting.com/My-T1e.jpg

[Slapdookie]

here's my tes

black tes
aim shock reg chrome
cp lightning drop red
FBM on/off asa
spud bolt
new designz high flow valve
nightstriker nylatron hammer
red planet eclipse 0-300 micro gauge
evil pipe w/ red ultra tip
clamping feed neck
rubberized grips
silver zenitram trigger
50gm trigger switch

http://img121.echo.cx/my.php?image=10012041om.jpg
http://img146.echo.cx/my.php?image=10011339rr.jpg[/URL]

and here's my ONE

black/green one
shocktech balck reg
palmer micro rock
apm bolt
lightened modded ram by insane pain sports
new designz high flow valve
QEV
FBM drop
32 degrees on/off asa
twist clamping feedneck
asp 0-300 black micro gauge
evil pipe w/green ultra tip
zenitram trigger black
50 gm trigger switch



i also have a blk/red hybrid rdrive reg for the tes to complete the color scheme but i kinda like the chrome in there to break it up. let me know what u think

all i got to say is BADA**


http://img253.echo.cx/my.php?image=10011611jt.jpg[/URL]

http://img121.echo.cx/my.php?image=10012030xt.jpg

[nintendofreak]

http://img.photobucket.com/albums/v698/nesfreak/DSC04898.jpg

sweet

[TESballer]

2k3 Dragun TES
14" Evil Driver
Empire Reloader 2
BL Torpedo
32* Large Drop & On/Off ASA
Shocktech TES Bolt
Dragun TES Nightstriker XL
CIP 2k2 Intimidator Feedneck
New Designz HP Cupseal/Valve Pin
PE 72ci 3000psi
150g switch, 250 too hard, 50 too light

edit:

Website down... no pics till it's up....
http://motorwave.net/tes8.JPG

[Psycho_warden]

Finnaly got my new semi. I usually play pump.

http://img.photobucket.com/albums/v721/psycho_warden/100_0351.jpg

http://img.photobucket.com/albums/v721/psycho_warden/100_0350.jpg

[kopporo]

C:\Documents and Settings\Gustavo Adolfo\Mis documentos\Mis imágenes\Adobe\Digital Camera Photos\IMG_0204.JPG (http://)

[kopporo]

http://img53.echo.cx/my.php?image=img02050av.jpg

http://img51.echo.cx/my.php?image=img02072ng.jpg

http://img51.echo.cx/my.php?image=img02097kl.jpg

http://img51.echo.cx/my.php?image=img02784ac.jpg
:D

[sureshot30]

http://teampenetrate.9k.com/photo6.html
The TES and the Dragun Compact are mine. Sorry, but I dont know how to put the pics on the page like some of you do.http://teampenetrate.9k.com/images/andys_gun55.jpg

[evilkid]

http://img.photobucket.com/albums/v504/tippmann16/IM000407.jpg

[snakeplayer21]

uh oh, guess who clammied his Dragun..... i did i did!!!!!!

http://img261.echo.cx/img261/7504/clammytesstage125wy.th.jpg (http://img261.echo.cx/my.php?image=clammytesstage125wy.jpg)

btw, please dont pm me on how to do this, as i am barely ever on pbreview ( like once every 4 monthes :( )

and that pic is a bit old, it is now solid black and i have an egg

[DrewDodson89]

I don't have any pics but heres my setup. Blue M3 with tboard and blade trigger, Milled for top cocking, Gas thru/Expansion chamber, Modified parts: Valve, Valve cup, bolt, Striker, LPC, V/A. All internals have neen polished

[EVILDaddy07]

http://img.photobucket.com/albums/v229/EVILDaddy07/Da_Shiznit.jpg

[SwingingUtters]

http://i8.photobucket.com/albums/a23/SwingingUtters/P7090001.jpg

http://i8.photobucket.com/albums/a23/SwingingUtters/drallion2.jpg

http://i8.photobucket.com/albums/a23/SwingingUtters/drallion3.jpg

w00t - New owner of a Dragun Marker

[armorlite]

Spudnukl Nylatron Bolt
Ported Polish Valve
JDMOTO's eyes
T-board (not in pic)
QEV
Smart Parts Gauge
Macdev LPR
Zenitram trigger
Empire reloader b
Hybrid push on/off

http://img.photobucket.com/albums/v220/Arm0rlite/T1%20Pics/T1Resized.jpg
http://img.photobucket.com/albums/v220/Arm0rlite/T1%20Pics/T1Closeupresize.jpg
http://img.photobucket.com/albums/v220/Arm0rlite/T1%20Pics/T1eyesideResize.jpg
http://img.photobucket.com/albums/v220/Arm0rlite/T1%20Pics/MacdevLprcloseupResize.jpg

[JGAC]

http://jgac.sportsrant.com/coppermine/albums/userpics/10001/thumb_IMG_0823.JPG (http://jgac.sportsrant.com/coppermine/thumbnails.php?album=12)

Recently acquired from wulf1010

[tighttippmann]

recently traded for...

outside:
http://x1.putfile.com/7/20016510419.jpg

inside:
http://x1.putfile.com/7/20016432885.jpg