E-grips?!? for cheap

[Xtra_long_balls]

Anyone have a e-grip off of their BD, as cheap as possible?? I'm gonna do a little experimenting...... i figure I might as well use a BD grip instead of a e-99 or other grip seeing as the grip off a spyder is more than the cost of the entire BD compact. Anyway, you can reply to this post or PM me...... Thanks guys.

[ShutterBoI]

I think the bd compact is restricted to 10bps and is plastic
( not even composite) correct me if i am wrong bd owners. After all you can get a used esp for like 90 bux.. saw one somewhere, i'm gettin mine for 80 =)

[LeGeNDse]

the gun is not limited to 10 bps

its the frame that limits it

[Xtra_long_balls]

I don't care, I just want a cheap e-frame to play with.

[halB]

check www.paintballinc.com they hve em for sell

[Xtra_long_balls]

What a friggin rip off! 150 for the bd grip. I can buy a BD compact with the grip for 100. Screw that! But thanks for helping.

[LeGeNDse]

ummmm the bd comact has a plastic frame and a plastic trigger

the only ones that have alum frames are the hi compact, lcd, and basic, sniper, and stars and stripes

[LeGeNDse]

and where do you see 150 for a bd grip.. the only thing that is 150 is the PI E-2 which is a marker

the alum frames are the e frame 2 and the full function frame

[Xtra_long_balls]

I don't friggin care if it's plastic, so long as it's electric.

[FuzZyXL]

I want to attach an M3 e-Gripframe to my Rebel but it's not on the list of campatible markers.
If some kind soul with a Pi marker (or a spyder, or something with spyder-compatible gripframe) would measure the distance between front and rear screws, and the distance between rear screw and sear, I'd be eternally grateful.
... Maybe not eternally ... at least a few minutes, though.
I just need to know how much milling needs to be done.

The Pi employee I emailed told me to give up and buy a new marker, then ignored me. Jerk.

[ShutterBoI]

the reason rebel are incompatible with spyders / draguns is because the frame is flat instead of curved the reble has a flat surface for the frame and the spyder has a curved surface

[FuzZyXL]

wow! thanks! that's the first straight answer I've gotten ... EVER. If the holes and the sear line up, it';s a simple matter of fabricating an adapter or machining the gripframe flat.

ShutterBol, you rock. Unless you're lying to me, in which case you only mostly rock. Heh.

[starboarder2001]

hey dont go buying a compact and take off the grip...check this out first.

http://www.paintballgateway.com/m3elframal.html

get that or just gut the bd compact. My friend has had the bd compact for 5 months and it is a verry strong and sturdy gun. now he is selling it and getting an led angel.

[Blimpey_boy]

Does the M3 Black Dragun Basic have a plastic trigger frame?? I heard that it has a plastic trigger. I need to know because I'm getting a basic and I'm also buying the Sweet Spot Trigger Stick, has anyone ever used one of those triggers? if so are they woth it?

[Furious pb]

tirgger is plastic, frame is aluminum. Yes, you should get a sweet spot trigger, takes away all of the slack, since it's adjustable.

[PaintballDude]

http://64.70.222.180/Merchant2/merchant.mv?Screen=CTGY&Store_Code=MP&Category_Code=TF

[LeGeNDse]

Originally posted by Furious pb
tirgger is plastic, frame is aluminum. Yes, you should get a sweet spot trigger, takes away all of the slack, since it's adjustable.

thats the full function LCD frame

the M45 frames on compacts are all plastic

[L2m3d]

Guys just so you know if you want a cheap electro frame you can get one from M3 directly, stainless steel, LCD, Full auto, Semi, basically everything of the Kingman ESP deluxe or whatever it is only for about 120$ instead of 200$ Sometimes you can also find Black Dragun frames on Ebay for really cheap. And no the compact frame is not limited to 10bps, I've gotten mine to shoot faster then that. Does anyone know if you can convert a black dragun to low pressure? What does it involve?

[starboarder2001]

yes they are limited to 10bps...and why the heck are u asking if it can be converted to a lp gun? its the same thing as a spider so if u can convert a spider to a lp gun than ofcource u can do it to any spiderclone.

pretty much it involves...

getting A NICE reg..if u are using co2 than a palmer
second get a higher flow bolt and valve
polishing the internals helps a little

[Xtra_long_balls]

Starboarder also forgot you need a new spring kit. You don't necesarily need a new bolt either, just make your stock one higher flow, then use the money u saved on something more worthwhile, unless of course you're gonna get a delrin bolt Just take out your venturi and polish your bolt face (doesn't help for LP, but breaks less balls, trust me I know). The madmann and 32 degrees spring kits are both good ones. High flow valve is the 2nd most important thing next to your reg. The AKALMP valves are excellent but don't fit spyders/clones with the slimline stryker. For a reg, if you're using co2 a palmers is about the only way to go. It should take out almost all liquid co2, but get an antisiphon too.

[starboarder2001]

Originally posted by Xtra_long_balls
Starboarder also forgot you need a new spring kit. You don't necesarily need a new bolt either, just make your stock one higher flow, then use the money u saved on something more worthwhile, unless of course you're gonna get a delrin bolt Just take out your venturi and polish your bolt face (doesn't help for LP, but breaks less balls, trust me I know). The madmann and 32 degrees spring kits are both good ones. High flow valve is the 2nd most important thing next to your reg. The AKALMP valves are excellent but don't fit spyders/clones with the slimline stryker. For a reg, if you're using co2 a palmers is about the only way to go. It should take out almost all liquid co2, but get an antisiphon too.
yea thanks for reminding me....my blowback knowledge is slowly slipping away from me lol:D

[Xtra_long_balls]

Don't worry...... your impulse is much better than any spyder.... :)