black dragon basic fps problem

[flipazoid]

i just got a black dragun basic i can't get my fps to up the most i can go up for is only 240 fps and that velocity adjuster is crank all the way in. the psi pressure off the gauge is 600. i am using hpa. can anyone please help me.

[JackRB]

raise the psi or you might have to get a new spring kit

[LeGeNDse]

some black draguns i heard were shipped with the marker cocked so the spring lost its tension, get a new spring kit

[richarddufault]

Raise your operating pressure, but don't go over 900 or so PSi or you may kill yourself.

I use CO2 on mine, and could not get it over 275 until I got a Spyder spring kit - problem solved. Those kits are $20.00 CDN and contain everything you'll ever need for springs.

[flipazoid]

thanks for the reply guys but how do i raise the psi? is it the small allen screw behind the gauge on the botton of da regulator? if so how? turning it to counter clockwise to will is increase psi?

[dragun_master]

go to www.m3paintball.com and then click on videos they show you eveything on how to fix your gun, it helped me fix my gun.:D

[pinoy in hawaii]

hey everyone how can i rise my psi on my gun:D thanks

[pinoy in hawaii]

plz answer me cuz i cant watch the video on m3.com cuz it only shows a orange box with a thing and no pictures are showing

[LeGeNDse]

i think you have the bottomline reg since you have the guage at the bottom, to the right of the guage is a screw i think either a 2.5mm hex wrench will work, welllscrewing it clockwise will decrease pressure while counterclockwise will increase pressure

[pinoy in hawaii]

i have an led

[QtRKoReaN]

Does every Black Dragun have this fps problem? I just want to know because if they do, I need to order a spring kit before I get the gun!

[Dixi Normous]

no, of course not. but it is good to have a spring kit just in case. sping tension can change very easily depending on temperature and humidity.