PDA

View Full Version : 20 bps?

redmancba
08-04-2002, 11:11 AM
can the pi-e2 really go to 20 bps? if it can than thats crazy, and i might have gotten one insted of my e-99:|
paintballdiablo
08-04-2002, 08:35 PM
I believe the board i capped at 13 BPS. But you could probably uncap it, then your looking at 20+....but then you have to buy a HALO or a warp feed.
Sid
08-04-2002, 09:06 PM
I played around with and M3 sniper the other day, and you can set it to 20 bps in all modes. In full-auto, with the marker on but not gased-up, the solenoid can trigger 20 bps... its hilarious to hear an almost uninterrupted clicking sound. As far as it actually firing that fast, when its gased-up, the trigger is too fast for the marker... the action can't recock that fast.
halB
08-04-2002, 09:12 PM
why not? its a spyder clone and those can cycle 44 bps
Sid
08-04-2002, 09:21 PM
Well at this point its speculation, but it is probably the valve or something else in the system causing a bottleneck effect for air. I don't think it can recharge fast enough. I'll do some investigating though...
halB
08-04-2002, 09:34 PM
ahhh that would explain it.
redmancba
08-05-2002, 08:37 AM
if it could acctually fire that fast it would be absolutly insane(in the membrane, insane in the brain!!) ur hole hopper would be gone in 10 sec.!!
AngelsHolocaust
08-05-2002, 08:40 AM
bottle neck effect?
Furious pb
08-05-2002, 09:25 AM
I agree with Sid, the solenoid can work that fast, but I doubt that the bolt can release and cock 20 times in one second, Maybe if you got a different bolt. Stock bolt is terrible. I see no point in firing that fast; slather a rope with paint and just sling it at people, same effect.
paintballdiablo
08-05-2002, 11:19 AM
Bottle effect: It goes from a high volume, say the LP chamber, to a low volume, sy the valve and cup seal, back to a high volume, say the bolt and out the barrel. This restricts flow.
pinoy in hawaii
08-06-2002, 05:26 PM
it does work work that fast even when gassed up my friend has a lcd and set it at 20 bps and it was workin so the the bolt can move that fast but a hopper cant:D
Sid
08-06-2002, 10:41 PM
Hmm. The one I tried could have been low on air.. I didn't check... but any how, I'll still look into it...with pinoy, it could be the pina colladas talking :D
LeGeNDse
08-07-2002, 08:06 PM
the HALO B loader is advertised at 2O+BPS im sure the guys at Odyssey Paintball have seen it go farther than that maybe 26 i've heard
Dixi Normous
08-08-2002, 10:18 AM
I think if you buy a TASO Turbo Valve, and a Check It Delrin Bolt Kit, and you are using Nitro you should be able to get pretty close to 20 bps.
Aglar
08-08-2002, 11:14 AM
If you can pump out 10-13 BPS, is anything more REALLY necessary?!
dragun_master
08-14-2002, 12:05 AM
if you can get 20bps your girlfriend must love you:love: