PDA

View Full Version : Cocking the Black Dragun....

skidmark414
08-05-2002, 04:51 AM
I have a question. Yesterday, I was playing paintball with my Black Dragun. Sometimes, my gun would be extremely hard to cock. I don't know why. :confused: Does anyone know what's wrong, and/or have suggestions? Thanks.
Shoe3
08-05-2002, 06:57 AM
it was reeeeeeeeeeeeeaaaaaaaaaaaaaaaalllllllly annoying
Shoe3
08-05-2002, 04:06 PM
up
DeFauLt
08-05-2002, 09:15 PM
this occasionaly happes with flush cocking guns. feild strip, oil, reassemble and see if theres any difference.
PaintballDude
08-06-2002, 11:35 AM
I agree. Oil your marker...
pinoy in hawaii
08-08-2002, 02:39 PM
same thing happened to my e99 well its because the bolt is to big for the internals and its scratching the inside thats why its hard to cock
skidmark414
08-11-2002, 08:47 PM
Are you sure? I don't think the E-99 has flush cocking, correct me if I'm wrong, and also it only happened at certain times, so when I get back from vacation I'll oil my gun. Thanks for the feedback, I really appreciate it.
skidmark414
08-13-2002, 04:40 PM
I think the problem might have been that it was 100+ degrees and the metal bolt expanded, because in my house I don't have problems cocking it.
skidmark414
08-14-2002, 12:32 PM
up
LeGeNDse
08-14-2002, 08:30 PM
maybe its the pin that connects the flush cocking with the bolt, sand dat to get it smooth and oil it
Roc-pile
08-16-2002, 05:49 PM
The same thing just happened to me. I tried to strip it, but I cant get the bolt out. Anyone?
LeGeNDse
08-16-2002, 07:29 PM
the snap back connection to the bolt has 2 screw in holes, one for the snap back pin or screw, and one that locks it on the side or something. you have to release that first before taking out the snap back connecting screw