Help!!

[Hotshot<>=]

i just got a aci 3000psi remote and every time i screw in my co2 it all shoots out a little bottum hole where i screw it in. what to do?!?!?

[edspyder]

orings

[Hotshot<>=]

nope i used both my12 once co2's whitch both didnt work (sprayed out). then i replaced orings for bith and tried again, still no go.
the small 12 gram adapters work but thats it

[FrOnTMaN]

are you sure that the slide check is in the right position?

[andy156]

do u mean like a leak in the micro line.. lube the hose

[Hotshot<>=]

no i mean (and note i really know absolutly nothing on remotes) that when i screw my co2 in the adapter it sprays out the little drilled hole. The hole is at about the 2nd to last thread on the adapter. What happens is when i screw my co2 in it hits the pin and releases to early and i loose a lot of co2 or it gets too cold and i cant get it in. can i just plug that little hole or mess with the little red knob (wich i also have no idea what it does)???????

[xavier678]

um, if your remote is similar to mine, unscrew the knob above where you screw in your co2 tank, screw in your co2 tank and then screw in the knob. make sure it is all hooked up to your gun first.

[Hotshot<>=]

yeah thats what i thought you did but it still pushes the pin down and since its not screwd in it still sprays co2.

[xavier678]

what brand tank and remote do you have??

[Hoplon]

Sounds like the nipple is too long. Try screwing it in fast. You may end up having to screw an empty tank on and then filling it.

[xavier678]

that will work just it will be harder to fill, that sucks, my PMI remote works great. Heard stories of leaks, but not with mine.

[Hotshot<>=]

it an aci remote

[xavier678]

okay, found that out. Have you tried filling it through the hose?? I think that it may be a problem with your pin valve. If you look across the top of your tank can you see it sticking up, How high, what brand is your tank.

[Hotshot<>=]

it would probably work filling through the hose...but what happens when i change co2's? i have a pure energy 12 ounce and a uhh...other 12 ounce that is exactly the same. THe pin is about even w/ the side.
Also, could i just plug that little bottum hole the co2 sprays out of or is it important for something?

[xavier678]

I think that would be more trouble than good, for the moment its purpose has excaped me but it is there for a reason. If its that big of a deal, call ACI and tell them that their nipple is too big in their remote hose. it shouldnt do that.