Loading Problem

[Blimpey_boy]

I have a BD Basic and a 12v Revy and if I shoot fast a ball gets jammed beween the bolt and the feed port and I have to cock it all the way back until it will shoot, I'm thinking that my revy isn't feeding fast enough my friend says that my batteries are low. Can someone help me with this?

[Codestar20]

Change the batteries and see. If that doesn't work then you must be shooting too fast. Does your revy have an x-board or WAS board?

[noggins_1500]

Maybe, you just suck!
haha just kidding, get an x board and an evolution kit, grec

[Blimpey_boy]

I already came up with that idea mr.9v revvy

[ImpYa]

I found that i could out shoot my 12volt revvy with WAS Turbo board and J&J Impellor very easy. Im not asking you to believe me, im just saying what i have experienced.

I used to pinch paint, but i got my eVLution 2 today and played a quick game with some friends after school...i didnt pinch let alone chop one all this evening. Normally i would have about 5 pinched balls in one afternoon of play...the only way i wont out shoot my revvy is if i set it at 11bps.

Hope this helps

ImpYa

[Dixi Normous]

actually I like keeping the shot speed low, like 10 or so. It saves a lot of paint. For some reason I pull the trigger really really fast. I can easily outshoot a revy. One day my friend and I used a barrel tube to make a straight verticle loader so no balls could get stuck (it only held about 30) I shot it over the chrono. We did it like 10 times and the highest we got it to was 14.5 bps (well out of a revy's range). so ya, try simply keeping your shot speed at 10 or 11.