Ahhh! Help!

[spencer_dale]

I am VERY frustrated with my tippy 98c I bought a crapoly sight from fred meyer and now when i tried 2 screw it to my gun, it striped!:mad: the was less then 5 mins after i opened it, it was probably my fault but it could be to the fact that it was a $15 dollar daisy sight ment for air guns. Well ne wayz, i striped the part where you screw it in to, it is not the screw its self. so how do i fix this?
Please dont make NE cheap shots, "haha! a daisy sight!" or tell me to get a new one.

[sniper14]

i dont quite understand what you mean. you say the screw itself didnt strip? or did it? and what sight is it, or does it have a name? if it was ment for air guns it would work on a paint marker, because its a air gun.

[spencer_dale]

to clear things up a bit,

The screw isnt striped, but where you screw it into is.

Yah i know that a paintball gun is an air gun but it said "pellet gun".

and it said a daisy red dot sight.

[Kalo one one]

You just have to have it re-threaded. and you will most likely need to use a larger screw. A machine shop can do it, or if you have the tools and right dril you can rethread it yourself.

:eyes:

[cmaddsav]

If you are able to you might be able to put the screw through the stripped area. I dont know what it looks like exactly but i hope it helps. You find a small bolt are nut that will fit and is able to work on the gun. If not i can only ofer using a type of tape specifically electical tape. Sorry if that didnt help but i tried my best. Good luck!