PDA

View Full Version : Upgrading Impulse

Di2uid
10-12-2002, 04:38 PM
Hey Everyone, Im going to upgrade my impulse a little bit more. Can anyone suggest what i should get? Thanks for your time
-Mike

my current setup is:

32 degrees impulse
12'' ultralite
12'' teardrop
delrin bolt
dye stickies
toxic trigger
toxic dropforward
eclipse trigger ( getting )
68/3000 crossfire tank
12v revvy with xboard
ejh28
10-12-2002, 04:41 PM
New hopper, if ur anything like me u can out shoot ur hopper easily, i would get an Evo II or halo b, But elTwicho has a Evo II and i'm getting a Evo II so u should too !
midknight
10-12-2002, 04:45 PM
If you're using a derlin bolt, you'll need a stainless or brass hammer. The New Designz ram is great. A vert adapter (I love my 15 degree) would be nice, but you don't really need it. Maybe a solenoid optimizer, LPR, or Tapeworm if you have a problem with FSDO.
llCanibusll
10-12-2002, 04:49 PM
maybe an lpr?
midknight
10-12-2002, 05:04 PM
Yeah, definitely an LPR, espicially if you get a vert adapter.
Di2uid
10-12-2002, 05:05 PM
Thanks A Lot GUys! Any Other Upgrades?
midknight
10-12-2002, 05:26 PM
Maybe a front cap or an LP valve if you want em. I'd actually recomend a front cap but you really don't need it.
Skog
10-13-2002, 01:28 AM
Originally posted by midknight
Maybe a solenoid optimizer, LPR, or Tapeworm if you have a problem with FSDO.

no solenoid optimisers, including the tapeworm and LPR, cure FSDO but either an LPR or tapeworm is a very good upgrade to get for other reasons (increased efficiency and elimination of bolt stick)
Di2uid
10-13-2002, 01:10 PM
Alright, Thanks Guys.
Dr J
10-13-2002, 01:19 PM
Midknight,

Skog is right, tapeworms only help with bolt stick. The best way to eliminate FSDO is to get a ND Slick Shaft and keep your bolt and ram assembly from having to much dow in them.

Di2uid,
With your set up I would recomend a ND Slick Shaft, a stainless hammer (I prefer the Demonic Black Hole Hammer), and a tapeworm. EPBO has tapeworms mad cheap. Or get an ISO mod on your gun. It's like having an external VFF. EPBO has them also, that's what I run on my gun.

Dr. J
Di2uid
10-13-2002, 03:07 PM
Thanks Dr. J
Skog
10-14-2002, 04:23 AM
Originally posted by Dr J
The best way to eliminate FSDO is to get a ND Slick Shaft and keep your bolt and ram assembly from having to much dow in them.

<shameless plug> actually the best way is to go to my FSDO guide (http://www.geocities.com/theskog/fsdo.html) where it has everything you could possibly want to know about fsdo </shameless plug>