PDA

View Full Version : matrix problems read ASAP

ski_god69
10-15-2002, 08:01 PM
I recently fixed my matrix's leaking problem and now it holds all the pressure and will fire, recock, and everything but it wont fire paint. I have push button matrix with trinity,centerflag vertical reg(running at 185-200psi) and the paint wont leave the barrel. and for some reason lots of air is coming out of the handle grip area. please help me asap

could it be the trinity?
Silent Knight
10-15-2002, 08:47 PM
sounds like your trinity is too low, turn it up. do you know how to properly set your trinity?
Predator2
10-16-2002, 02:36 PM
after u get the gun dry firing without skips during rapid fire, turn it up another 1/2 turn and it should be fine...
ski_god69
10-16-2002, 05:02 PM
okay we took the trinity right off and the plug in. still not enough pressure. its firing, holding pressure just not enough air to force a ball out.
Predator2
10-16-2002, 05:07 PM
ok two things, the pressure from ur inline is too low, not enough air in tank, or the paintballs are too big, i had a problem like that w/ big balls trying to fit in a smaller barrel, since this gun i very LP, the balls are pushed out, not popped out....
Xtra_long_balls
10-17-2002, 07:12 PM
Sorry, I just couldn't resist! :laugh:
ski_god69
10-18-2002, 09:59 AM
very funny....not

some more ideas would be aprriciated
Predator2
10-18-2002, 11:09 AM
u may also want to take apart the solenoid, there may be something blocking the air flow trough the solenoid to the manifold...
Silent Knight
10-19-2002, 09:14 AM
by any chance did you take your bolt kit apart before your marker started doing this?

if so you should double check to make sure you put everything back in the correct order. Yes, it does happen and it can be the cause of your problem. I've seen it happen before.