lpr leak... HELP!!

[thesoybomber]

hey guys- i just traded my cocker for a sweet matrix, and the first thing a made it a point to do is learn how to clean it. so i took apart and cleaned the inline (centerflag) reg, and put it back on (i screwed the adjuster cap all the way in). i took off the shocktech lpr, but i couldnt figure out how to take it apart without messing it up, so i put it back.

when i gassed my gun up, there was a tiny leak coming from the bottom of the centerflag reg (i read in another post how to fix that, and ill try it soon), but just after that leak(ab 3 seconds), the lpr started leaking like crazy!!

its leaking where the lpr connects to the gun, and i cant figure out how to fix it. i lubed all the orings around the lpr and they all look functioning, so i dunno the problem!!

PLEASE HELP ME!!!!!!!!! I WANNA PLAY W MY MATRIX!!!

thanks in advance

looks kinda like this:

[Paint Bulley]

does it leak where it screws in?

your drawing is kinda wierd, but mabye that's just me :crazy:

[Mr_Toad]

First try backing the adjustment screw on the centre flag out as the input pressure could be to high.

is the o ring damaged? if so replace it

nice drawing:D

[splatterpunx]

replace the o-ring,lots of times you wont even see the damage

[Mr. Y2K]

that's the problem, a lack of trinity!
but just check to see if there's any chips or dents around there as well, replace the o-rings and put a ton of lube on it and go from there.