PDA

View Full Version : phantom feed question

exedotbat
10-21-2002, 07:40 PM
How does the horizontal feed attach to the gun and how does the feed tube attach to the horizontal feed? The reason I ask is because I may use those phantom parts to convert a automag into a stock class pump.
Mutated Goose
10-22-2002, 01:13 PM
First off, where'd you get the pump kit!!!!:eek: :paranoid:

Second, I'm slightly confused by your question, but I'll try to answer your question as best as I can...
Mutated Goose
10-22-2002, 01:16 PM
One more thing, that's gonna be awfully hard to attach to a mag (supergluing, cutting, hacking, sawing) so your best bet would be to get a pvc 90 degree elbow (or 45) and attach a pvc pipe to it (or sc feed tube).

Hope this helps...
exedotbat
10-22-2002, 01:38 PM
I got the pump kit from agd, they found a box of them they are incomplete though. I got the answer to my question though. The horizontal feed is attatched to the body via one screw. And the feed tube just slips in the horizontal feed. Im thinking i might weld a nut on to the body, and just counter sink the hole on the hrizontal feed so it fits over the nut and then i can screw it to the body and just slip the feed tube in. Ill have to play with it though.
Mutated Goose
10-22-2002, 01:40 PM
Sorry I couldn't answer your question.... I was a bit confused... But now I get it...

Anyways, it sounds cool what you're doing... Fill us in if it works!
exedotbat
10-22-2002, 01:58 PM
Yup ill post pics if it gets done and working
C-Mac
10-23-2002, 03:27 PM
Couldn't you just tap a hole drilled into the body?
exedotbat
10-23-2002, 03:44 PM
the body is only a 1/16th of an inch thick
C-Mac
10-23-2002, 07:15 PM
yikes. I didn't realize there was so little to work with.