need some help

[drakenfier]

ok i went to clean out my gun today and a new thing happend. i put on the CO2 and it started leaking through the barrel. now i oiled the gun and im thinking maybe i put too much. put on the extra orings that come with the gun and wam leaks on both cocked and not.. so i put the black one in and leaks when not cocked but good when cocked.. do i need new orings or is there something im missing?

[woolf]

that happen to me i did all the same stuff so i took it to my local air Smith and he gassed it up and it worked fine i don't know what happen or what he did though but i once had a small leak and i just fired it (it relieves gas pressure)one more thing did you check your valve

[cocker kid 2k2]

check ur cupseal to see if anything on that is damaged if it is then replace it that should stop ur leak.

[Dixi Normous]

ya, sounds like your cup seal. even if it looks fine replace it.

[drakenfier]

ok the cup seal is the little thingy with the spring in the front block right?

[Dixi Normous]

ya, its the white plastic thing on the valve pin. you twist it off, counter-clockwise.