x boards

[commandman10]

Do x boards really do a lot?when i shoot fast with my dragun i chop alot.I have a 12v.Please tell me your expierences thanks

[CaustikSpecies]

i suppose, ive never had a revvy or an xboard revvy, but my brotherhas 1. I think he xboard just helps give the loader more power so it could load faster a little, just 1bps more, it also counts the time between balls dropping so it load faster. i wouldnt get the upgrade for ur 12v revvy just get an egg2 those things are awsome or if you've got the money get the HALO B!!! or just keep urs.:crazy:

[=iv=gir]

i wuld get a x-board but what kinda of barrel and paint are u using?

[ImpYa]

I agree with CaustikSpecies. If you have the money just get an eVoLution 2. If you dont have the money get an x-board.

I have an x-board from my 12volt revvy, that i replaced with a WAS Turbo Board. I will sell it to ya for $12 shipped to ya. PM me if interested.

Later

ImpYa

[commandman10]

I use the stock barrel and diablo paint

[Killer Kat]

CaustikSpecies, get your brothers hopper fill it up with 100 balls and time how long it takes for it to empty itself, then do the test with your regular hopper and tell us the results.

[CaustikSpecies]

Ok, i used a stop watch, 100 Diablo Blaze paintballs, and a JT Pods filed to 100 mark.

with 100 paintballs through his revvy it took
First test-8.4 seconds to empty it
second-9 seconds to empty it
third-8.3 seconds to empty it

all of thes readings average to about 11-12 close but not exactly 13 balls a second.
Ok now i did this test with my HALO B!

first
4.5
second
5
third
4 seconds flat

AMAZING. The 12v is fast, most people dont need the speed of Halo's but as Killer Kat asked I must do:goody:

[Killer Kat]

Use the other hopper as your catcher, That way you can run the test back to back a couple times each and average the results.

That way to you'll have the same amount of ballls each time ya run the test

[CaustikSpecies]

? i dont understand what u mean

[X_Brolly_X]

Have one hopper (that you are timing) feed into the other hopper, then you will have the exact amount of balls to test with the hopper you just filled, and you wont have to keep filling the tube. Thats what me and my friend did. I have a 12v revy w/ turbo board and JmJ impellers, and my friend has a stock rico ak. I fed almost 2bps faster, His would feed faster than mine when it was full, but had problems feeding the last few, mine fed the last few fairly quickly.

[CaustikSpecies]

still dont get it but what im going 2 do is first load the 12v revvy, and have it load into my halo..what will this proove wbaout both of the hoppers tho/

[X_Brolly_X]

You don't feed one into the other and have them both on, just the on with the balls in it, it just takes less time than filling pods over and over, then filling the hopper with the pod, and it makes shure that you are feeding the exact same amount. Its not realy that hard to understand.

[CaustikSpecies]

well thats dumb, thats what ive been doing after i fill up the pod actually and dump it into the hopper i place the loader of the pod and load the paintballs inside, so after timing i just refil it, god making everything complicated im already doing it good OK? :crazy:

[X_Brolly_X]

I was just trying to help you understand what he was trying to say. BTW, you way is still a little less efficient.;)