Pure Energy REg

[NICKYB]

im so freakin confused on this reg thing without pics. Ive seen the pure energy rig, but where whould i put that on my shutter? would it go where the mini expansion chamber is or the reg that came with the shutter? HELP!

[TLplus84]

it goes wehre teh Mini X chamber goes. that part is called the ASA for future references.

[NICKYB]

hey when i put it on, i guess i take off the mini x chamber, but then do i also just take of the reg that came with my shutter too?

[A damn fool]

u screw right into the asa, and run a line from the bottem to the botem line. Itll looke soimilar to the mini ex chamber, but a little loer, and a little wider, . U can se it at paintballgear.comn, under regs inder aoir sytems

[TLplus84]

but the stock Kingman hose won't fit on the Pure Energy because it has different thread. You can get an adapter for it..i forgot what it was called..

[A damn fool]

u dont have to take the shutter reg of, i did because i wanted a bigger drop forward. But, if u want to keep the reg, ur going to need to add special adaptors to connect the lines because the spyder reg takes metirc, but the new reg will take standard threads

[NICKYB]

how does proball shoot through the boomstick? and is it worht all the money or should i just leave the chamber and reg alone on the shutter

[TLplus84]

it's worth eVERY cent. I am glad i got my reg. It's a WGP, but you know what i'm talking about. teh Mini X chamber really doesn't do much except act as a forgrip...and the Kingman reg isn't all that great..

[A damn fool]

probabl is the crappest paint i vcan buy, besides zap and be. Buy big ball, they work the best with my boomiastick

[NICKYB]

so the hose on my shutter wont fit the pmi reg? does anyone know what adapters i need?

[TLplus84]

i think that Marbs/Allstar(only inf your'e runnin lp) are the best you can get. But hey, if big ball works good on your barrel, get that and save money. Also, Hellfire are nice too.

[NICKYB]

can anyone give me a list of parts that i need ( ALL OF THEM) to totally turn my spyder LP? lets say i havent upgraded any of it yet, what parts would i need

[TLplus84]

a high flow bolt, a reg, a turbo valve, and a low pressure chamber. The low pressure chamber on your gun is fine, you really dont' need another one unless you're going sub 250 psi. For the bolt, the best is the AKA lightning bolt, but I have the Shocktech Delrin bolt, and it will do just as well. As for the valve, the best is once again the one from AKA. BUT, you really don't need a AKA valve. ANY turbo valve will do, although the stock won't. I have a Venom Turbo valve, and i'm running alittle under 300 psi. As for the reg, the Pure Energy is a great reg for low pressure. A barrel without a lot of porting is recommended, such as the JJ Ceramic or the Lapco barrels, to maximise efficiency. Also, the barrel is preferred to be small bore.

[TLplus84]

also, polished internals are recommended so that little work is needed to move the internals. Less work=less pressure nesssecary to move the internals.

[NICKYB]

what is the advantage of goin LP over just gettin a PMI reg and fixin up my shutter

[TLplus84]

low pressure will give you more shots per tank of CO2. Also, it quiets your gun down dramaticaly. Accuracy is increased a little also.

[Predator2]

Having low pressure also allows you to use brittle shell paint. This is good b/c then it will always break on someone and it won't break in your gun.

[ptflyer]

and don't forget the spring kit..you'll need a lighter valve spring...and striker spring....

[TLplus84]

oh yaeh i forgot about springs. Did i alrady mention polished internals?

[Predator2]

The best spring set is the Socktech Spring Set-this is meant for low pressure.

[TLplus84]

i have a 32* one..and it's great. It lowered my psi like by 35 psi

[A damn fool]

The hoses wont fit ur stock reg to ur new one, but i have an idea. Buy a regular standard 90 degree macro line hose for the pmi reg, and use jsut one of the regular miacor line hose things for ur stock reg. Id recoment taking the entire reg off though,a nd buying a 20 dollar drop forward and reg, and then just buy a macro line kit