need help with which bolt

[adamholz18]

I have a Black Dragun Basic. I am shopping for a good and affordable bolt. There are so many different kinds of bolts I dont know which one to chose etc. I heard about a new type of bolt out.....here is the website what do you think of these.


http://www.joystreasures.itctv.com/j/joystreasures/default.asp?S=500&A=F&SearchText=&CategoryID=280743

[cocker kid 2k2]

i personally like the stock bolt i dont find anything wrong with it

[Dixi Normous]

um, didn't you mention affordable? those are 40 bucks!!! I would either get a CIP Full Force Bolt from paintballgateway.com, or a white wolf bolt from www.whitewolfairsmithing.com
But if you dont want a delrin bolt (because if they get liquid on them they swell up) you could get a nylon bolt from www.spudnukl.com
I dont like the stock bolts becauseof the venturi, and I couldn't get mine out even after I held it under a flame for like 20 minutes. also, the delrin and nylon ones have a lot less friction. if you are going to get the one from white wolf airsmithing, I heard the teflon impregnated ones were really good.

[Plastik]

depends on what u using ... if u use n2 then i would reccomentd using stock bolt.... but with co2 i would go with nylon or derlin..

[X_Brolly_X]

I thought it was cleared up a while ago, that delrin does not swell?

[rdtmk]

i ordered one of the Spudnukl 6/6 Nylon bolts for my Black Dragun Basic about a week ago. it hasn't arrived yet but i will post reviews once i get it.

the reasons i got it:

nylon (wont swell)
angled inlet port
"Spudnukl" is a cool word
only $19!!!
features that other bolts dont have (bigger intake hole)

[madgoat33]

DO NOT GET A WHITE WOLF BOLT. THE GUY IS A MORON. I order a high density blue bolt he sneds me a normal white one. Not to mention the fact he mills a 10-32 screw hole which DOES NOT work with spyder cocking rods(they are 8-32).

[wulf1010]

I have a white wolf derlin bolt it works great you do need to find a 10-32 screw to make them work......or you can do what i did and fill the tap hole with jb weld and re dril and tap to 8-32....its a pain but its good because finding a 10-32 screw that has threads on at the tip is a not easy.

[Dixi Normous]

what are you talking about? my dragun has 10-32 threads on the flush cocking rod. I've used it on my old spyder bolts and it just replaces the set screw on them...

[wulf1010]

interesting mine uses 8-32....dunno odd run maybe but i do know that spyder bolts use 10-32 or atleast my friends one dose casue he stoll my bolt for a while

[madgoat33]

Okay it is my experience that white wolf is not good. I just ordered a spudnukl bolt though.

[Dixi Normous]

could you be a little more specific? did you own one or just hear...

[madgoat33]

as in i bought one and it does not work.