What type of oil should i use on my gun?

[paintballdudes2]

What do you think I should use on my gun?

[TRTChaoS]

i used gold cup it pritty good

[in trauma]

anything synthetic

[Savior]

Yup, I use gold cup also. :) drop it right into the asa adapter (i think thats what its called) and shoot your gun (dry) about 20 times with the barell off

[FizNid]

Gold Cup is good stuff. Use it or lose it :)



FizNid

[Mecca13]

yo just use any oil that is meant for paintball. The wort thing you can do is use car oil and ruin your gun. Other than that all oils are about the same.

[ZacT26]

do NOT use wd 40 it eats your orings just use some oil made for paintball.
try hoppes 9 oil
pmi oil
gold cup
most any work good.

[Guesswho?]

I use PMI oil, its good stuff i think, i like it. Really and oil will do fine. Except oil that is not made for paintball.

[FSU Paintball]

DO NOT USE ANYTHING other than oil made specifically for paintball. Otherwise, you could eat up your internal seals and o-rings, and do other bad things to your gun. Only use paintball gun oil. Just about any is fine. I use everything from KC's TroubleFree to PMI to AGP AutoLube. It's all about the same.

[ZacT26]

i said that already i think a mod can close this thread now.

[TRTChaoS]

Gold Cup Rules heh is it ok to use 3in1 oil to polish the out side of the gun?

[Masta_Gardener]

Gold Cup rocks!!!....get it....if not, try something made for PBall, that's an excellent choice if you can't get GC

[iipaintballer]

APG Mag just had an article on this subject a few months ago. KC oil is the best. They have 2 types, one for CO2 and one for N2. This is the best paintball oil on the market.

[xtremepballman27]

I use corn oil. the stuff you use to fry fish.... works! Lol just kidding. I use gold cup too! What gun do you have? Sorry if this has been answered allready

[pr0kch0p]

i use KC trouble free

its what my local pb shop sells so that is what i buy

[blake_sw]

I was oiling my o-rings awhile ago and decided to put some oil in the hole in the duckbill (where the co2 screws in) is this ok??? The guy at the proshop said it was ok. I put about 5 drops in and fired the gun about 20 times to cycle the oil. SHOULD I HAVE DONE THIS?

[iipaintballer]

yeah thats fine.

[Easy Target]

Don't worry blake_sw, this is something most paintballers do (or should do) as it allows oil to get to the o-rings and internals and protect them. The only other way to do this is to completely take apart your gun but thats a bit too much trouble so most people just put oil in the ASA before they go paintballing.

[in trauma]

Originally posted by FSU Paintball
DO NOT USE ANYTHING other than oil made specifically for paintball. Otherwise, you could eat up your internal seals and o-rings, and do other bad things to your gun. Only use paintball gun oil. Just about any is fine. I use everything from KC's TroubleFree to PMI to AGP AutoLube. It's all about the same.

actually it doesn't matter if it is for paintball that just drives the price up

all you have to do is use synthetic oil!!!

petroleum distilates destroy th o-rings in your gun

[blake_sw]

Allright, THANKS!! I thought no one would reply (lousy wankers...) And it was a special pball oil.