official piranha picture thread
 

post your pics

No all text posts or questions please

This is my piranha sts titanium with Lapco bigshot,wgp reg,maddman springs,turbo valve, and drilled va. Dye stickies a drop foward, and a gauge are soon to come.

I'd list everything on my gun, however, that'd take a while. Unless you guys want to know...


I have an old pic, its the only one I got. My gun does not look like this anymore, I promise:)

Ok, to answer all questions, here is whats on my gun:

PMI Perfect Drop
Nitroduck Minireg 68/3k
Polished WGP reg (eh, it works)
PiranhaPro custom drilled Vertical adapter
Magnaport Turbo valve
Drilled Shocktech Delrin bolt
Polished internals
Custom Delrin ball detent
10" Blue CP .691
10" Blue CP .689
10" Blue CP .687
Revvy of course
PiranhaPro Custom trigger job
Polished internals
Houge Grips
Runs at 325 psi, +/- 3 over the chrono

I think I got it all...

This....

and this

and this... sorry i dont know how to put em all on one post so i am not really wanting to spam. this gun is sweet

hmmmmmm this

sorry i dont know how to put em all on one post so i am not really wanting to spam

balh hey dont get mad at me i am the only one posting pics

I took these pic from a site. but hey

:o this is getting tiering! umm anyone got some fries?

alrite heres mine. right now i got a revvy and new hose.

my tricked piranha

My piranha looks like this.

Dude sweet, I thought my boo-yaah was on that pic, but it isn't. I'll take another one and post it. I was hoping I had a pic without the boo-yaah. I can show off my new jt pack also. I thought that pic was a hell of a lot more updated than that.

In the pic above you see a pmi x-ray non thermal goggle system, a reds comfort 3-pack a 12" boomstick(attached to marker) a smart parts progressive 12"(belongs to the wife, but I use it quite often actually) and the stock barrel(an 11" perfect pursuit if that's how you spell that) an eVLution loader, a pure energy nitro tank 48/3, a perfect drop, macro, and the thread saver to my tank if you look close(between the trigger guard and the gas through foregrip.

Latest additions include: Boo-yaah frame, jt slammer 4 pack(horizontal) a sticker of chyna on the tank, a boo-yaah sticker on the hopper and I've been thinking about getting a reg any suggestions? I have also been thinking about replacing the ram air, does anyone know what I could replace it with? Suggestions are helpful and very appreciated, thanx.

this is it, now featuring everything in my sig that isn't shown.

Here it be


G3 Ext Pro

Custom Products 12' Chrome Barrel
WGP reg
CP flame drop with ON/OFF asa
Dye Stickies
trigger job
modded venturi
spring kit
12v rev

and it comes stock with turbo valve, drilled VA, and LPC so it runs about 350 psi with the PMI reg ( but going that low made it shoot horrible ) but I am yet to try going low with the WGP reg.

Heres my Baby

my tricked out VTL
 

Here's my tricked out G2 VTL

I tried a number of different barrels and found that the 32 Degrees Terminator works best of all. Note the aluminum trim around the barrel, LPC & the drop forward. A sure sign of too much free time.

It's been a while since I posted a pic of my marker on the site. Matter of fact, it was right after
the addtion of the original Blowback forum, so, close to a year.

Anyway, that pic of was my Piranha STS G2, pretty much stock except for a Proline Lazy Z
drop forward.

Well, now I've added a new barrel, Pure Energy Reg, KAPP DZ2 drop forward and some other
cool stuff.

maybe this one will be bigger.

here