Paintball Forums

Paintball Forums (http://www.pbreview.com/forums/index.php)
-   Custom Markers (http://www.pbreview.com/forums/forumdisplay.php?f=64)
-   -   Picture Thread (http://www.pbreview.com/forums/showthread.php?t=15641)

Andrew 08-19-2001 10:36 AM

Picture Thread
 
Post pictures of your custom guns!

Creek 08-27-2001 03:45 AM

1 Attachment(s)
C:\My Documents\My Pictures\blazer.JPG

I'll get a better pic in a few days dam camera mess me up

Richy_C 08-27-2001 11:32 AM

1 Attachment(s)
one sweet blazer

MacGyver 08-27-2001 02:03 PM

1 Attachment(s)
here is my custom pgp

Creek 09-04-2001 03:00 PM

People this is a picture thread. As far as custom goes if you can buy it over the counter as a kit, it isn't really custom. But I am trying to give a little lead way here. If you want to make comments of what or who post pics', make a new thread. Comments on the markers pics' can be made here.

Letchworth40 09-09-2001 08:01 PM

1 Attachment(s)
My Totally Custom Cocker. NOT ANNOD YET. what color should i anno it?

Viper1357 09-21-2001 10:04 PM

My PREDATOR paintball gun
 
1 Attachment(s)
Here is what would have been used in the movie PREDATOR if they were using paintball guns.:crazy:

Actually it's my PEC MASTER with some military mods and a Tippmann Ordnance M203 grenade/shotgun load launcher... And yes, it is quite heavy.

Viper1357 09-30-2001 03:18 PM

Look a new part on my gun...
 
1 Attachment(s)
I was not happy with the look of the barrel looking soo much shorter than the Grenade Launcher even with the mock flash hider, So I just added a new longer one. It is similar to an M4A2? barrel extender/muzzle brake/flash hider, or whatever. :)

In anycase it gives me the look I want, and it looks kinda cool, at least I think. :crazy:

toocool_guy 10-04-2001 02:01 PM

1 Attachment(s)
Here' smy baby. THis gun was built from scratch.
Bob Long Body, Big Shot barrel, AKA lightning bolt and rear cocking setup, 32 degrees valve and pin, brass cup seal, 32 degrees springs, Taso LP chamber and vertical ASA adapter, Taso velocity adjuster, .45 Benchmark trigger frame and internals, both Male and Female Palmer stabllizers, quick disconnect on a steel braided hose, dye microguage, and custom side slot cover.

toocool_guy 10-04-2001 02:01 PM

1 Attachment(s)
Hers's the other side.

toocool_guy 10-04-2001 02:08 PM

1 Attachment(s)
Hers' the other side.

Viper1357 11-07-2001 07:10 PM

My new MASTER Sniper
 
1 Attachment(s)
I'm back with a newly modified PEC MASTER sporting an extremely accurate 14" custom ported PEC barrel, a custom machined aluminum black powder coated 10" ventilated forgrip handguard, and an authentic M16/AR15 multi-position collapsible rear stock. I have also mounted a Bushnell 4x scope. This gun is unbelievably accurate, and when sighted in to the proper eye relief would be quite formidable to play against while in the hands of a seasoned sniper.

Viper1357 11-07-2001 07:15 PM

Another look
 
1 Attachment(s)
Here's another look from the business end of it.

drake9 11-09-2001 09:11 PM

shocker-angel
 
1 Attachment(s)
heres a pic of my custom shocker with...
*angel trigger frame
*front mount max flow
much more
"read sig."

Viper1357 11-12-2001 08:37 PM

Ok then, how about some shorties?
 
1 Attachment(s)
Ok, you have all seen my super gargantuan Schwartzenegger, too long, too heavy, monster gun with grenade launcher...
Well, now that winter is supposedly on it's way, and we have only a few selected winter outdoor games here, (MN) I have decided to try and play indoors. I decided to modify a PEC MASTER (surprise) to a smaller gun size, as my friends said my long guns would be a bigger target than me... I couldn't decide on which of 2 mods I liked better so I made both of them. I Have a choice of vert or horiz tank config and will be using 4oz. tanks and 140 rd hoppers. I plan to try and use both at the same time ala Lara Croft.. I know you guys are laughing, but it may just work out...
Here is my left handed gun it is a 6" bbl ported...

Viper1357 11-12-2001 08:43 PM

And this is the other...
 
1 Attachment(s)
Here is the right handed one. It is slightly heavier with a 7-1/4" bbl with a oversized 2"long ported muzzle brake. If I choose to use just one, this would be the one I'd use.

Creek 11-24-2001 06:49 PM

1 Attachment(s)
My blazersC:\My Documents\My Pictures\blazers.jpg

snipinhick 11-28-2001 05:25 PM

traccer/cocker
 
1 Attachment(s)
this is my primary marker now that the phantom is sold (don't worry friends, there is another one in the near future)

EMSTER 12-25-2001 12:06 PM

1 Attachment(s)
another look

JERSEYDEVIL 12-28-2001 04:45 AM

1 Attachment(s)
3e custom


All times are GMT -8. The time now is 10:43 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.