Paintball Forums

Paintball Forums (
-   Bob Long (
-   -   Settings thread (

4THDEGREE 01-09-2005 06:27 AM

Settings thread
We have been getting a lot of questions lately about settings so I thought I would share my settings and invite others to do so. Let us try and keep a uniform format.

Board - WAS 2.8

Dwell - 8
Debounce - 2
Eyes - Forced
BIP Delay - 0.1
Ram Delay - 15.0
Bolt Delay - 0.1

Lopez17 01-09-2005 07:08 AM

Please post your preferred settings in here for WAS, Frenzy, Entropy, etc. and I'll add it to the Ultimate Sticky as this is useful information that we've been getting asked for a lot lately. Thanks for getting this going 4th! :tup:

Homer 01-09-2005 05:23 PM

O.K. some of you will laugh at these numbers. But to make my marker legal here we go. No bounce at all!

ALIAS w/Techna (longer pull, activates at the rear, and no spring)

Debounce 25
MBounce 4
BIP 1.0
Bolt 12 MS
Forced for Eye's

Yeah it may seem slow in settings. But can hit 18 BPS without trying, and 21 when the caffeine, nicotine, and adrenaline are in the groove.

(Sidenote smoking and drinking excessive amounts of caffeinated beverages are NOT enodrsed by Bob or PBReview. Just my individual vices I choose)

Jaster 01-10-2005 07:11 AM

Texas Storm:
Board - WAS 2.8
Dwell - 8.1
Debounce - 3
Eyes - Forced
BIP Delay - 0.0
Ram Delay - 15.0
Bolt Delay - 0.1
LP - 70psi

Board - WAS 2.8

Dwell - 8
Debounce - 2
Eyes - Forced
BIP Delay - 0.1
Ram Delay - 15.0
Bolt Delay - 0.1
LP - 75psi

Hmm... it seems 4th's and my Classics are set exactly the same... Hmmm.... :) :laugh:

4THDEGREE 01-10-2005 09:54 AM

I guess we don't have to think long and hard to figure out who copied who now do we?:P

Insanepain 01-30-2005 07:44 PM

Dwell - 8
Debounce - 2
Eyes - Forced
BIP Delay - 0.3
Ram Delay - 15
Bolt Delay -1.5
LP - just hovering above 50 on my 300 psi guage

4THDEGREE 01-31-2005 12:33 PM

LP pressure seems a bit low. Do you experience any shoot down on strings of paint?

Samrog777 01-31-2005 12:41 PM

Why doesn't anyone have settings for frenzy? :(

Insanepain 01-31-2005 12:59 PM

no i don't experience verymuch shootdown to none

C-RaD 01-31-2005 01:11 PM

2k2 Timmy
Frenzy 1.13
Dwell - 8.5
Debounce - 2
Eyes - Forced
BIP Delay -.6
Bolt Delay -15
LP - 75psi
Time- 10:00
m bounce-2

4THDEGREE 02-03-2005 02:56 PM

Settings for my Alias with Frenzy

Dwell - 8.0
BIP - .5
Bolt Delay - 12
DeBounce - 2
M Bounce - 0

The bizarre thing is I cannot get this thing to bounce at all. Oh well, at least I don't have to worry about running my debounce at fifty like "some" people! ( just kidding Homer. I remember who has to load all the pods!:D )

4THDEGREE 02-18-2005 09:55 AM

Sorry for the double post but these are the settings now that I have the new roller trigger in. I definitely found the bounce now!:D

dwell 08.0
Eyes forced
BIP 0.1
bolt 12
debounce 9.0
mbounce 2

Jaster 02-18-2005 12:20 PM

wow that really upped your bounce some. Out of curiosity, did you try changing the trigger set up some to see if the bounce slowed? or tried dropping you LP psi a little?

4THDEGREE 02-18-2005 12:28 PM

I am trying to find that happy medium. I can get the trigger adjustment to let me get back to 2.0, but i don't like the feel of the trigger. One of the bizarre things is how easily the larger magnet that came with the trigger influences the microswitch lever. I may actually try a smaller magnet. If I make the triiger pull too short it works like I have shorted the second and third poles on the microswitch as it fires like it is reactive. I am going to try and shorten the trigger pull a bit more and see if I can get away with it. I am really only losing 2 bps as I can still get up to 14 pretty easily, but you know how it is.......

TechnaTrigga858 03-04-2005 05:31 PM

Species Alien Intimidator
Board: WAS Equalizer 2.7
Dwell: 8.0
Debounce: 2
Eye Mode: Delayed
BIP Delay: 0.0
Ram Delay: 15.0

mooseknuckle 03-04-2005 06:44 PM

Ironmen Timmy was 2.7
dwell: 7.5
debounce: 2
eyes: forced
BIP Delay: 0,0 ms
Ram Delay: 15 ms
Bolt delay: 0.1 ms

4THDEGREE 03-11-2005 07:16 AM

Alias with Tadao

Loader delay-1
Bolt delay-11
Eye Mode-2 (forced)
Fire mode-1/semi (sometimes 3/modified NXL)
MROF-6 (15.25 BPS)

dantriggerhappy 03-11-2005 12:33 PM

Frenzy 127.1

-LPR (remember, I have the prototype volumizer/verdikit thing, testing is not complete yet): 70
-HPR: No idea, shooting very close to 300 though
-Dwell: 9
-Debounce: 25
-Mbounce: 0
-Bolt Delay: 2 (might have to up it just a bit, chopped some paint today, but I was using reloader B on speed 3 with very very brittle paint)
-Ramp BPS: 4 :P
-BIP: .5

Lopez17 03-12-2005 08:35 AM

Dan your bolt delay should (without a shadow of a doubt) be over 10. Having it that low causes the eyes to see the bolt and think it's the ball.

infuse05 03-27-2005 04:29 PM

Hey 4TH whats ur BPS with the frenzy 116 with the settings that u have?????

All times are GMT -8. The time now is 08:58 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.