The Kingman Database
 

Basically, you copy the form below and fill it out to share what youve done to your marker. If the item is still stock, just leave it blank or say "stock." As always, keep discussion to PMs, and no flaming or trolling or this will be closed.


__________________________________________________

Marker

Model -
Color -
Barrel -
Regulator -
Bolt -
Striker -
Trigger -
ASA -
Feedneck -
Board -
Grips -
Valve -

Accessories

Tank -
Hopper -

Custom modifications




Other




Pictures


__________________________________________________

I know there are some adjustments needed, so fill me in. And if there isnt enough blank space for some things, just add it yourself. And if you have more than one, post them all, just fill it out twise.

my back up spyder....lol it sux soooo much. i havent used it in years


Marker - TL-X
-Color - Blue
-Barrel - J&J Ceramic
-Regulator - N/A
-Bolt - N/A
-Striker - N/A
-Trigger - N/A
-ASA - N/A
-Feedneck - Lapco
-Board - N/A
-Grips - Duct tape
-Front block - N/A
-Cupseal- N/A

Accessories
-Tank - 20 OZ
-Hopper - Revvy

Custom modifications

Lightened trigger pull


Other *Example - Eyes, eye covers, Spring kits, etc.
N/A

oops, i should probably take out my example things and put them somewhere else...

Not much but it works for me.

Marker - '05 Electra ACS
-Color - Blue and black
-Barrel - Empire 7 piece barrel kit
-Regulator - stock gas thru
-Bolt - ACS bolt
-Striker - stock
-Trigger - Stock Rocking trigger
-ASA - stock
-Feedneck - stock clamping one
-Board - stock
-Grips - stock
-Front block - Trinity 7D
-Cupseal - stock

Accessories
-Tank - PMI 88/4500 HP with '06 Empire Tank cover
-Hopper - eVLution II with y board

Custom modifications

none


Other
none

Well it's hardly in working condition and I don't actually have the parts together, but I'll post this to help move the thread a bit.

-Marker - Spyder Fenix
-Color - Matte Silver
-Barrel - Freak Junior, .693 (?) insert, All-American tip
-Regulator - Stock Fenix reg/Evil Detonator
-Bolt - stock aluminum
-Striker - stock
-Trigger - half modded stock, never finished =P
-ASA - stock Spyder ASA with drop
-Feedneck - Newer Kingman feedneck, not sure if it has a name
-Board - Scenario Dreams T-Board
-Grips - schtok
-Front block - Stock, built into Fenix reg
-Cupseal - people upgrade these things? stock.

Accessories
-Tank - 68ci/4500psi Crossfire HP
-Hopper - clear blue Halo B w/ rip

Custom modifications - my solenoid is made of cheese

Other - no joke, my solenoid is made of cheese

my electra
 

Marker - '05 Electra ACS
-Color - Blue and black
-Barrel - Custom Products One Piece Barrel (black)
-Regulator - Stock Expansion Chamber
-Bolt - Stock Delrin ACS bolt
-Striker - Stock
-Trigger - Stock Rocking trigger
-ASA - Stock
-Feedneck - Stock clamping feedneck
-Board - Stock
-Grips - Stock
-Front block - Stock
-Cupseal - Stock

Accessories
-Tank - 20 oz C02 tank
-Hopper - Halo B

Custom modifications

none


Other
none

Marker - Spyder Imagine 04" Body
-Color - Green
-Barrel - J&J Ceramic 14"
-Regulator -Victor II Grip
-Bolt -Stock Polished
-Striker - Stock
-Trigger -Stock from my Victor II
-ASA - Stock
-Feedneck - Stock
-Board - none
-Grips - stock
-Front block - stock off of Victor II
-Cupseal - stock

Accessories
-Tank - 20oz. Pure Energy with XSV Stickers:)
-Hopper - 12v Revolution W/ X-Board

Custom modifications
Shorter and lighter trigger pull with the help of Otters Customs
Polished Striker and stock polished bolt


Other
Soon To Come: Imagine Frame, Dye Stickies, Lapco Cup Seal, New Impeller for my Revy, and I will Intellifeed my gun with the Revy.

Later in its life: Halfbacking, Painting, LP with almost all AKA parts.

This gun started as a Victor II, but i need a new VA and a new body and i got the Imagine one, once i get the new frame it will be all imagine.



Picture *Link only!* its in the BB of the month

Marker - MR1
-Color - Black with camo paint to add color
-Barrel - 20 inch J&J Ceramic
-Regulator - (expansion chamber) Lapco 2-stage
-Bolt - Alamo: derlin
-Striker - stock
-Trigger -stock
-ASA -stock
-Feedneck - stock
-Board -
-Grips -stock
-Front block - stock
-Cupseal - stock

Accessories
-Tank - 20 oz CO2
-Hopper - Viewloader (8bps)

Custom Mods
-remover top of butt stock

Soon to come
-polished internals (just lazy)
-new feed neck and the CCM feed neck adapter

Marker - Spyder Imagine
-Color -Green,black, and silver (trying to get rid of the silver)
-Barrel - 14" Teardrop
-Regulator -N/A
-Bolt -Shocktech superfly
-Striker -Stock (getting a new one soon)
-Trigger -Stock (Soon to come: sweet spot)
-ASA -Stock
-Feedneck -Broken stock (getting a new one soon)
-Board - stock
-Grips - stock
-Front block/VA - N/A
-Cupseal -stock

Accessories
-Tank - CO2 (soon to be crossfire N2)
-Hopper - Ricochet Apache

Custom modifications
Does using washers from my A/C count? :D



Other
nothing

Marker - Xtra
-Color - Light blue
-Barrel - JT 12'' Carbon Fiber Feather weight
-Regulator - None yet
-Bolt - Stock for now
-Striker -
-Trigger - OtterSC customs
-ASA -
-Feedneck - Pvc pipe
-Board -
-Grips - Wood ones I did
-Front block/VA - Stock, but CheckItAssault 15* is wanted
-Cupseal -

Accessories
-Tank -24 oz
-Hopper - 12v Revolution 200 rd W/ Xboard - black Custom modifications

- Homeade stock, soon to be replaced. This one's a little wobbly for me, but once you're in battle, you don't notice. If someone wants it cheap, lemme know.

- Already mentioned, but the OtterSCCustoms trigger job




Other




Picture

http://i59.photobucket.com/albums/g3...o/2345ec99.jpg
http://i59.photobucket.com/albums/g3...o/40f1cc5c.jpg

Marker - Spyder Imagine
-Color -Steel blue
-Barrel - boomstick
-Regulator -xchamber
-Bolt -stock
-Striker -polished
-Trigger -stock
-ASA -stock
-Feedneck -stock
-Board -mech
-Grips -stock
-Front block/VA -stock
-Cupseal -stock

Accessories
-Tank - 47/30 crossy
-Hopper - halo b

Custom modifications
-removed venturi
-drilled v/a

Marker - MR1
-Color -Black
-Barrel - Phat 7 Pcs.
-Regulator -Gas Through
-Bolt -stock
-Striker -stock
-Trigger -stock from imagine
-ASA -Deadonpaintball.com On/Off
-Feedneck -CCM/SPPS MR series adaptor with T-lock feed neck
-Board -Stock Imagine
-Grips -Can't remember
-Front block/VA -From a Psychobalistic Superbolt
-Cupseal -Stock for now

Accessories
-Tank -68/3000 Pure Energy HP
-Hopper -12v Revy with X board

Custom modifications




Other




Picture

__________________________________________________

Marker - 2K3 imagine
-Color -green
-Barrel - J&J 12 inch ceramic
-Regulator - evil det
-Bolt - i dont remember
-Striker - stock
-Trigger - stock
-ASA -stock
-Feedneck CCM
-Board -stock
-Grips -stock
-Front block/VA -stock
-Cupseal -stock

Accessories
-Tank -72/3000 PMI
-Hopper -Richochet 2k

Custom modifications
trigger flip mod, spring removal, polished internals



Other




Picture *Link only!*


__________________________________________________

Marker - 2004 Spyder Pilot
-Color - Black
-Barrel - Empire 14'' Kit
-Regulator - BL Torpedo
-Bolt - Stock, modded
-Striker - Nightstriker XL
-Valve - New Designz HP valve
-Trigger - Checkit for now
-ASA - New Designz on/off
-Feedneck - New Designz clamping
-Board -Scenerio Dreams T-board
-Grips - Dye Stickies
-Front block/VA - Spyder Compact
-Cupseal - New Designz

Accessories
-Tank - JT 50/3000
-Hopper - Draxxus Pulse

Custom modifications
Body has been annodized black
The stock bolt has the venturi removed and lightend
Front block has been drilled out.
NDZ Valve pin has been further modded for better flow
Macroline and fittings have been added

Other
I use Dow55 on the torpedo reg LOL
Picture *Link only!*
right thurr
http://img.photobucket.com/albums/v2...1115Medium.jpg

Marker - Spyder Sonix Pro
-Color -Black/Red
-Barrel - 14" Smart Parts Progressive
-Regulator - None. I have an X-chamber
-Bolt - Stock, modded
-Striker - Stock
-Trigger - CAMD 2.0 ESP frame.
-ASA - Pilot drop forward.
-Feedneck - Stock
-Board - Stock
-Grips - Stock
-Front block/VA - Stock
-Cupseal - Stock

Accessories
-Tank - 12oz. Kingman co2 tank
-Hopper - VLocity Jr.
Custom modifications
Removed bolt venturi and polished.

My gun is pure secks. I gotta get a new pic.



Other
I love it.:love:
Also has a 32* spring kit


Picture *Link only!*

http://i34.photobucket.com/albums/d1...r/100_0277.jpg This picture is OLD BTW. I have to get a new one soon.

http://i34.photobucket.com/albums/d1...r/Photo001.jpg NEW PICTURE! Isn't it so much better now? I need a new valve, detens, HPA, and clamping feedneck for sure.

Marker - Spyder Victor 1 ("Jasper")
-Color - Blue
-Barrel - J&J Ceramic 14"
-Regulator - Evil Detonator
-Bolt - Shocktech Supafly
-Striker - Stock, polished
-Trigger - Stock, modded (see below)
-ASA - Unknown brand chrome on/off, Smart Parts mini drop forward
-Feedneck - CCM clamping
-Board - None, mech aluminum TL frame, polished
-Grips - Hogue .45 grips
-Front block/VA - Trinity 7D angled front block
-Cupseal - Maddmann Rocket valve

Accessories
-Tank - 12 oz CO2 (HPA is on my ProMaster)
-Hopper - 12 volt Revolution w/ X-board, camo edition

Custom modifications
Double trigger has been milled down to a single-finger
Custom Sight rail w/ Crosman rear-projection red dot sight
Polished Aluminum trigger frame (Stock plastic one is too weak)



Other
Custom-made camo gun shroud (in second pic)





Picture *Link only!*
Sorry, these pics are a little out of date. The HPA tank is now on my ProMaster, and the red-dot sight is missing from the pics because the lens had been smashed. It is now re-installed.

Marker - Spyder Rodeo
-Color- Black
-Barrel- Custom Products Barrel - 14 Inch - Black - .689
-Regulator- Stock
-Bolt- Stock
-Striker- Stock
-Trigger- Stock Imagine Double Trigger
-Grip Frame- Spyder Imagine 04 IPI 3.0 E-Grip Frame
-ASA- Stock
-Feedneck- Trinity T-Lock Feed Neck
-Board- Stock Imagine Board
-Grips- Stock Imagine 04 Grips
-Front Block/VA- Stock
-Cupseal- Stock

Accessories
-Tank- WGP Worr Gas 50/3000 HPA Tank
-Hopper- ViewLoader eVLution 3

Custom Modifications
- Polished Internals (except for striker)
- Removed Trigger Spring

Other
- 32 Degrees Spring Kit

Marker- Spyder Imagine 04
-Color- Green
-Barrel- Stock Spyder Rodeo Barrel
-Regulator- None Stock Gas Through Grip
-Bolt- Stock
-Striker- Stock
-Trigger- Stock Rodeo Trigger
-Grip Frame- Stock Spyder Rodeo Trigger Frame
-ASA- Stock
-Feedneck- Stock w/ Kingman Straight Elbow
-Board- None
-Grips- Dye Sticky Grips
-Front Block/VA- Stock
-Cup Seal- Stock

Accessories
-Tank- 20oz CO2
-Hopper- Some gravity fed hopper

Custom Modifications
- Polished Striker and Valve Pin (haven't got to the other stuff yet)

Other
- 32 Degrees Spring Kit

I just took out the stock front trigger spring and put in one from a clicky pen.

Marker - Spyder 2000
-Color -Goldish
-Barrel - 14" J&j Ceramic
-Regulator -Currently a hose
-Bolt -Modded stock
-Striker -polished stock
-Trigger -stock
-ASA -Psyco Ballistics Z-Drop
-Feedneck -stock powerfeed
-Board -none
-Grips - stcock M16
-Front block/VA - Hole in body, Lapco when I fix it
-Cupseal -Lapco( yes people do upgrade these things BloodLust

Accessories
-Tank - 16oz
-Hopper -stock

Custom modifications
Every Otter mod in the book.

Picture http://i34.photobucket.com/albums/d137/pinkanese/P1010009.jpg