Paintball Forums

Paintball Forums (
-   First Endeavor (
-   -   Anything to know before I buy (

hurleyhonda22 11-23-2007 04:59 PM

Anything to know before I buy
I owned a Quest before(used) so I didnt have to experiance it out of the box. Is there anything I need to know before I gas up this marker? Or can I just gas it up and play

Tabris17 11-23-2007 06:23 PM

I make a note to clean and relube the regs and anything else like the ram or in this case the bolt when getting a new marker.

Uziel Gal 11-24-2007 04:19 AM

Yep - no telling how old the grease in there is, whether it has been exposed to dust etc. Always a good idea to give it a clean.

I would also give the marker another good clean after it has worn in (then again, being a spool valve, it needs regular cleaning and greasing anyway).

Beyond that, it should be good to go out of the box.

Chickenmunga 11-26-2007 12:40 PM

Check the LPR guage to make sure it's between 80-110 PSI as well.

More often than not, the grease is Dow 55, which needs removed. Toss the Dow 55 in the garage for lubing... your lawnmower or something? Do what Tab and Uziel say, making sure to use something better.

Uziel Gal 11-26-2007 12:46 PM

Treat it to a fresh, quality, alkaline battery of course, but that pretty much goes without saying.

Tabris17 11-26-2007 01:13 PM

The lpr should be set at 100 psi actually to start and then after a few cases you can drop it to 95, then a few more and down to 90. Only after several months of it being used are people saying then can shoot it at 80 psi with no drop off.

MadDealer 03-08-2008 09:17 PM

I purchased mine at Hard to believe their are selling them for 399.99 I like mine very much and order another one tonight for my daughter. MadDealer

PS The only ones they have left are blue rust.

I did have some small problems with it at first. You can read them here under the title ( Need Some Help )

All times are GMT -8. The time now is 11:10 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.