Thread: Gun Name
View Single Post
Old 07-08-2004, 06:41 PM   #1
toothpastedog
Registered User
 
toothpastedog's Avatar
 
Join Date: Jul 2003
Location: La Canada (Los Angeles)
Send a message via AIM to toothpastedog Send a message via Yahoo to toothpastedog
Gun Name

Picture s Have Arrived

*Update*There will be a few very expensive versions of this gun, but for undisclosed reasons, the gun will be prodced so that the customer will only have to pay the bare minimum, the quality of the product will not be sacrificed in any way though. i am hoping to be able to set the stock msrp at around 500$, and hopefully even lower. thank you

Okay people, hi it's me. Time to unravel (almost) all my little secrets (well, most of them at least). now i know i have told a select few of you ( ) what i have been doing for the last couple months, but now i will tell all.

First off though, why post this in the impulse forum? well, what i am about to tell you about uses (at least the prototype does) an impulse's ram and hammer assembly, and because the only reason i was able to come up with it is because people in this forum, really only FOM and Dr J, have helped me with info about threads and such i can assure you almost no one else would have other wise known.

Okay, here it goes... For the last three months or so i have been developing my own gun. basically i have come up with two gun designs that no one has ever made before. they are very similar, but they are different. like i said, they work nothing like any other gun out there, but if you wanted to compair them to something, the sft shocker is the closest thing to them, even though it still isn't much like em'. here are some non-specific specs:



Updated!!!!

--Input pressure: 100-300psi
-Solenoid Input pressure: 50-90psi (no chopping thought with the lvl10 like piston)
-Stock LPR System
-Breach Sesor: Reflective sensor, internally mounted, with an adjustible delay
-Trigger: 25gram microswitch
-Electrical Power Sorce: 1 Common 9volt; lasts aprox. 10,000 shots
-Gas Power Type: douple regulated co2 (not including lpr) w/ an anti syphon kit installed on the asa and the tank's valve or normal HPA/Nitro
-Fire Modes: Semiauto, programable Bursts, fullyauto, and response
-Board: tournament legal locking system (two antivibration dip switches)
-Barrel type; autococker
-Ajustible dwell: yes, between 5 and 100 milliseconds
-Feed Tube Type: impulse threads
-Ball detent Type: impulse threads
-On Off Switch: embeded flip type on/off switch
-Readout/LED: a led that that blinks when the gun is fired
-Bolt/Internal/Body Material: Bolt=Titanium, Ram=Titanium, Internals=6061 aluminum, body=7075 aluminum, trigger frame (and intigrated asa)=7075 aluminum
-Stock Barrel: any barrel can be purchased with the marker upon request, though it comes stock with a oe piece out of house .693 barrel with porting
-Valve: none
-Hammer: none
-Bolt Pin: none
-Volumizer: none (required)
-Bolt style: The SOB bolt kit comes standard. The SOB bolt get about 1400 shots from a 68ci, 4500psi tank. It makes the gun function much like a closed bolt gun (meaning it is as if the valve is not held open like a normal open bolt gun).
-BPS Maximum: has been tested to go to 48bps and is going to go even higher (the tests were done with heavier than normal all aluminum internals)
-Length: 0.75 inches more than an impulse, about the same as an led angel
-Hieght: 5.5 inches from bottom of the grip frame to the top of the gun
-Width: 1.25 inches
-Three way adjustible trigger (post travel, pre travel, and micro swithc activation point) w/ 100% no slop


by mid august is am going to post many many pictures here in the impulse forum, and if you want to see it in action, you can send me 5$ for a dvd (don't ask now, i'll remind you when the time comes you can buy them).

oh yeh, the reason for posting this was to get you guys to help me out on something; although i have made a "rolls royce" or paintball guns, i haven't been able to come up with a good name yet. here is what i need from you, what would be a good name for my gun. think of this as a contest. the wining name gets a free dvd of the gun in action.




__________________
WILL BE OUT OF TOWN, AND OFF LINE UNTIL, AT THE EARLIEST, JULY 25TH

Mike the G
IQ Paintball
Here are some comments made by satisfied questioners:
"im glad to know there are real helpful people in these forums as yourself, i give my thanks." IMPULSE2ME
"You know some much about impys i'm starting to think that u are an impy!"-VwBillabongwV
"Ok, thats it... I cant take it any longer. How do you do it toothpastedog!?!? Do you have the Impulse manual tatooed to your chest..."-SPPaintball
"Holy Crap i just learned alot right there, i feel 30% smarter."-master_chadwick
"That's like asking the Pope if he knows who God is. TPD knows everything, including the meaning of life, which he will not share with us because our simple minds couldn't comprehend it." -nos911
"Yes, Toothpastedog is the official Impulse gangster (tm)" -Mai Thai man (SuperBeaner)
"I care, Mike....(dramatic pause)....i care..."-Master_Chadwick
"lol wow mike u really are a G...hahhahhahhahhahhaha
what a pimp " -wanabe TOSA
"We dont have to post to do our job, especially with people like TPD around." -wolverine
toothpastedog, come to Canada right now.-MBPG
Mystery Gun?
IMPULSE FAQ
Oww Owww Quiting

Last edited by toothpastedog : 05-24-2005 at 08:00 PM.
toothpastedog is offline   Reply With Quote